采用反应热压烧结法制备了Ti3SiC2/SiC复合材料,针对SiC含量对该复合材料致密化程度、力学性能以及应力.应变行为的影响进行了研究.结果表明:(1)随着SiC含最的增加,试样难于致密,试样需要在更高的温度才能达到较高的致密度;(2)随SiC含量的增加,Ti3SiC2/SiC复合材料弯曲强度和断裂韧性提高,但SiC含量达到50%时,由于复合材料含有较多的孔洞,使强度和断裂韧性降低;(3)Ti3SiC2/SiC复合材料在常温下表现为非脆性断裂.
参考文献
| [1] | RACAULT C;LANGLAIS F;NASLAIN R et al.On the chemical vapor deposition of Ti3SiC2 from gas mixtures[J].Journal of Materials Science,1994,29:3341-3348. |
| [2] | R.Radhakrishnan;J.J.Williams .Synthesis and high-temperature stability of Ti3SiC2[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1999(1/2):85-88. |
| [3] | N. F. Gao;Y. Miyamoto .Dense Ti3SiC2 prepared by reactive HIP[J].Journal of Materials Science,1999(18):4385-4392. |
| [4] | YANCHUN ZHOU;ZHIMEI SUN .Temperature fluctuation/hot pressing synthesis of Ti_(3)SiC_(2)[J].Journal of Materials Science,2000(17):4343-4346. |
| [5] | 刘永合 .自蔓燃高温合成碳化物陶瓷[J].粉末冶金技术,1999,17(02):130-37. |
| [6] | Elraghy T.;Barsoum MW.;Kalidindi SR.;Zavaliangos A. .DAMAGE MECHANISMS AROUND HARDNESS INDENTATIONS IN TI3SIC2[J].Journal of the American Ceramic Society,1997(2):513-516. |
| [7] | BARSOUM M W .TAMBER EI-Raghy,Room-temperature Ductile Carbides[J].Metall And Mater Trans(A),1999,30(02):363-367. |
| [8] | TAMBER EI-Raghy;BARSOUM Michel W;ZAVALIANGOS Antonios .Processing and mechanical properties of Ti3SiC2:Ⅱ,effect of grain size and deformation temperature[J].Journal of the American Ceramic Society,1999,82(10):2855-60. |
| [9] | TONG Xiao-hua;OKANO Takashi;ISEKI Takayosh et al.Synthesis and high temperature mechanical properties of Ti3SiC2 composite[J].Journal of Materials Science,1995,30:3087-3090. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%