进行了7B04-T7451铝合金在不同蠕变温度、不同应力水平下的多组蠕变实验,根据蠕变率的变化,得到了合理的蠕变温度为150℃;在此温度下进行了不同应力水平和时效时间下的多组蠕变实验,分析了加工条件对微观组织和力学性能的影响.结果表明,高的应力水平能加速合金强化相的析出和转变,同时增大位错的流动能力,因此,随着蠕变时间的增加,材料的屈服强度呈先上升后加速下降的趋势.
参考文献
| [1] | A. Heinz;A. Haszler;C. Keidel;S. Moldenhauer;R. Benedictus;W. S. Miller .Recent development in aluminium alloys for aerospace applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):102-107. |
| [2] | Deschamps A.;Brechet Y. .Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):200-207. |
| [3] | PRIME M B;HILL M R .Residual stress relief and inhomogeneity in aluminium plate[J].Scripts Matefialia,2002,46(01):77-82. |
| [4] | Dumont D.;Deschamps A.;Brechet Y. .On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):326-336. |
| [5] | MUKHOPADHYAY A K;REDDY G M;PRASAD K S.Microstructure property relationships in a high strength Al-Zn-Mg-Cu-Zr alloy[A].Australia:Institute of Materials Engineering Australasia Ltd,2004:883-888. |
| [6] | B. H. Zhu;Y. G. Zhang;B. Q. Xiong .Effect of Artificial Aging Temper on the Microstructure and Properties of 7B04 Pre-Stretched Thick Plate[J].Materials Science Forum,2006(Pt.1):901-906. |
| [7] | 李志辉,熊柏青,张永安,朱宝宏,王锋,刘红伟.7B04铝合金的时效沉淀析出及强化行为[J].中国有色金属学报,2007(02):248-253. |
| [8] | MITCHELL C Holman .Autoclave age forming large aluminum aircraft panels[J].Journal of Mechanical Working and Technology,1989,20:477-488. |
| [9] | Airbus A380 takes creep age-forming to new heights[R].Airbus Materials World,2004. |
| [10] | 李劲风,郑子樵,李世晨,任文达,陈文敬.铝合金时效成形及时效成形铝合金[J].材料导报,2006(05):101-103,119. |
| [11] | GB/T 2039-1997.金属拉伸蠕变及持久实验方法[S].,1997. |
| [12] | 《航空制造工程手册》总编委员会.航空制造工程手册:飞机钣金工艺[M].北京:航空工业出版社,1992 |
| [13] | MUKHOPADHYAY A K;YANG Q B;SINGH S R .The influence of zirconium on the early stages of aging of a ternary Al-Zn-Mg alloy[J].Acta Metallurgica Et Materialia,1994,42(09):3083-3091. |
| [14] | K.C. Ho;J. Lin;T.A. Dean .Constitutive modelling of primary creep for age forming an aluminium alloy[J].Journal of Materials Processing Technology,2004(0):122-127. |
| [15] | 王祝堂;田荣璋.铝合金及其加工手册[M].长沙:中南大学出版社,1989:84-110. |
| [16] | 李超.金属学原理[M].哈尔滨:哈尔滨工业大学出版社,1989:248-254. |
| [17] | 余永宁.金属学原理[M].北京:冶金工业出版社,2000:500-501. |
| [18] | 赵敬世.位错理论基础[M].北京:国防工业出版社,1982:155-160. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%