欢迎登录材料期刊网

材料期刊网

高级检索

本研究基于一种改进的元胞自动机(CA)与非线性有限元(FEM),建立了多道次热变形过程CA-FEM模型,模拟了β21s合金多道次非等温热压缩过程中的组织演变过程.通过有限元分析获得温度场、应变场、应变速率场等局部参数,作为元胞自动机模型的输入,模拟得到坯料心部与端部在多道次热变形过程中的组织演变特征.模拟过程中综合考虑热变形、静态再结晶、亚动态再结晶和动态再结晶等物理冶金现象.结果表明,坯料的局部热变形参数对组织演变影响较大,坯料心部再结晶程度大于坯料端部,心部组织细化效果优于端部.变形过程中的动态再结晶起主要的晶粒细化作用.

参考文献

[1] 沙爱学,王庆如,李兴无.航空用高强度结构钛合金的研究及应用[J].稀有金属,2004(01):239-242.
[2] 钱九红.航空航天用新型钛合金的研究发展及应用[J].稀有金属,2000(03):218-223.
[3] HESSELBARTH H W;GOBEL I R .Simulation of Recrys-tallization by Cellular Automata[J].Acta Metallurgica Et Materialia,1991,39(09):2135-2143.
[4] R. L. Goetz;V. Seetharamn .Modeling dynamic recrystallization using cellular automata[J].Scripta materialia,1998(3):405-413.
[5] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁.纯铜动态再结晶过程的元胞自动机模拟[J].金属学报,2008(03):292-296.
[6] Zheng CW;Xiao NM;Li DZ;Li YY .Microstructure prediction of the austenite recrystallization during multi-pass steel strip hot rolling: A cellular automaton modeling[J].Computational Materials Science,2008(2):507-514.
[7] 支颖 .板带钢热轧过程宏观行为与介观组织的综合模拟[D].东北大学,2008.
[8] Ho Won Lee;Yong-Taek Im .Numerical modeling of dynamic recrystallization during nonisothermal hot compression by cellular automata and finite element analysis[J].International Journal of Mechanical Sciences,2010(10):1277-1289.
[9] R. Ding;Z.X. Guo .Microstructural evolution of a Ti-6Al-4V alloy during β-phase processing: experimental and simulative investigations[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):172-179.
[10] MECKING H;KOCKS U F .Kinetics of ? ow and strain-hardening[J].Acta Metallurgica,1981,29:1865-1875.
[11] 段园培 .TB8合金热变形组织介观尺度研究与模拟[D].合肥工业大学,2009.
[12] R. DING;Z. X. GUO .COUPLED QUANTITATIVE SIMULATION OF MICROSTRUCTURAL EVOLUTION AND PLASTIC FLOW DURING DYNAMIC RECRYSTALLIZATION[J].Acta materialia,2001(16):3163-3175.
[13] Ivasishin OM;Shevchenko SV;Vasiliev NL;Semiatin SL .A 3-D Monte-Carlo (Potts) model for recrystallization and grain growth in polycrystalline materials[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):216-232.
[14] DERBY B .The dependence of grain size on stress during dynamic recrystallisation[J].Acta Metallurgica Et Materialia,1991,39(05):955-962.
[15] Song XY.;Rettenmayr M. .Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):153-160.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%