基于显式非线性有限元数值仿真分析方法,建立不同构型等壁厚加筋正六角铝蜂窝的全尺度精细离散模型,对比不同形式加筋蜂窝低速10m/s异面加载时力学特性的变化,评估出双筋加筋形式强于单筋形式,双厚强于单厚的加筋构型.研究加筋板厚度与蜂窝胞元壁厚间的匹配效应,通过改变筋板厚度,分析加筋板厚对蜂窝整体屈曲模式的影响,并采用等效表观密度特征因子评价加筋蜂窝的屈曲模式改变对整体力学特性影响的贡献度,发现筋胞匹配间存在明显的“分离点”,当所加筋板小于一定厚度时,加筋蜂窝的平台区平齐、完整,但随厚度增加,其响应特性突变,平台区波动剧增,超出此厚度比例构造的加筋型蜂窝其功用将受到影响；1.5倍胞壁厚加筋的蜂窝力学性能稳定,平台强度提升显著,是最优的筋厚选择方案.
参考文献
| [1] | LUG X;YU T X.Energy absorption of structures and materials[M].Cambridge:Woodhead Publishing Limited,2003:268-278. |
| [2] | GIBSON L J;ASHBY M F.Cellular solids:structures and properties[M].Cambridge:Cambridge University Press,1997:93-158. |
| [3] | Han Zhao;Gerard Gary .Crushing behaviour of aluminium honeycombs under impact loading[J].International journal of impact engineering,1998(10):827-836. |
| [4] | M. Yamashita;M. Gotoh .Impact behavior of honeycomb structures with various cell specifications-numerical simulation and experiment[J].International journal of impact engineering,2005(1/4):618-630. |
| [5] | Mean out-of-plane dynamic plateau stresses of hexagonal honeycomb cores under impact loadings[J].Composite structures,2010(11):P.2609. |
| [6] | 王闯,刘荣强,邓宗全,罗昌杰.铝蜂窝结构的冲击动力学性能的试验及数值研究[J].振动与冲击,2008(11):56-61. |
| [7] | 王永宁;李大永 .铝蜂窝异面变形数值模拟[J].中国机械工程,2006,17(10):340-343. |
| [8] | 樊卓志,孙勇,彭明军,王堃.基于ANSYS的金属蜂窝板热性能模拟研究[J].航空材料学报,2012(05):70-74. |
| [9] | QIU X M;ZHANG J;YU T X .Collapse of periodic planar lattices under uniaxial compression,part I:Quasi-static strength predicted by limit analysis[J].International Journal of Impact Engineering,2009,36(10/11):1223-1230. |
| [10] | QIU X M;ZHANG J;YU T X .Collapse of periodic planar lattices under uniaxial compression,part Ⅱ:Dynamic crushing based on finite element simulation[J].International Journal of Impact Engineering,2009,36(10/11):1231-1241. |
| [11] | Hhxcel Company .HexWeb(R) Honeycomb Energy Absorption Systems Design Data Report[R].Stratford:Hexcel Company,2005. |
| [12] | 罗昌杰,周安亮,刘荣强,邓宗全,李萌.金属蜂窝异面压缩下平均压缩应力的理论模型[J].机械工程学报,2010(18):52-59. |
| [13] | X. Edward Guo;Lorna J. Gibson .Behavior of intact and damaged honeycombs: a finite element study[J].International Journal of Mechanical Sciences,1999(1):85-105. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%