根据管线钢工业生产钙处理工艺,在实验室条件下通过水模拟和热态模拟实验研究优化了钙处理工艺参数.结果表明,当喂线位置在2个透气砖夹角中心线上且在其对面半区距包壁R/2处,喂线深度为0.6H,底吹气量为12m3/h时,熔池均混效果较好.在实际生产中,应根据钢水成分,特别是全铝和酸溶铝的质量分数来确定钙线的喂入量.喂线后钢水软吹5～10min较为合适.
参考文献
| [1] | Heinke R .Kinetic Model for the Formation of CaO and CaS in Aluminum Deoxidized Steel by Calcium Treatment[J].Steel Research International,1987,58:162. |
| [2] | Carlo Malilli;Walter Nicodemi;Maurizio Vedani et al.Control of inclulsions in a resulphurised steel[J].Steel Research International,2000,71(05):161. |
| [3] | Cieutti C E;Madias J;Gonzalez J C .Control mieroinelusions in calcium treated aluminium killed steel[J].Ironmaking and Steelmaking,1997,24(02):155. |
| [4] | Yoichi I;Mamoru S;Yoshiei K.Kinetics of Shape Control of lumina Inclusions with Calcium Treatment in Line Pipe Steel for Sour Service[J].ISIJ International,1996(36):S148. |
| [5] | Yoshihiko H;Mitsuhiro N;Shin F.Inclusion Modification Treatment[J].ISIJ International,1996(36):S151. |
| [6] | 朱苗勇;井本健夫;肖泽强 等.多孔喷吹钢包内流动和混合过程的数学物理模拟[J].金属学报,1995,31(10):435. |
| [7] | 朱立光,王硕明,段云祥,梁玫,张建设,黄永建.钢包精炼炉（LF）钢液流动的数学物理模拟与优化[J].特殊钢,2005(06):10-13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%