喷射成形是一种新型快速凝固技术,采用这项技术制备的镍基合金,具有细小、球状的晶粒和均一的组织,从而提高其性能.本文综述了喷射成形技术在涡轮盘用镍基高温合金中的应用及其发展与研究现状.
参考文献
| [1] | Lavernia E J;Grant N J .[J].Materials Science and Engineering,1988,983:81. |
| [2] | Bricknell R H .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1986,17(04):583. |
| [3] | Prichard P D;et al;Antelovich S D.Superalloys 1992,The Metallurgical Society[M].Warrendall,1992:205. |
| [4] | Huron M S.Proc.Of the Second Int.Conf.On Spray Forming[C].Swansea,1993:155. |
| [5] | Moran A L;Palko W A.[J].Journal of The Minerals,Metals & Materials Society,1988(12):12. |
| [6] | Moran A L;Madden C;Rebis R.Proc.Of the Second Int.Conf.On Spray Forming[C].Swansea,1993:165. |
| [7] | Kumagai K;Itami T;Kawashima Y.Proc.Of the Second Int.Conf.On Spray Forming[C].Swansea,1993:207. |
| [8] | Benz M G;Sawyer T F;Carter W T et al.[J].Powder Metallurgy,1994,37(03):213. |
| [9] | Bryant D J.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:79. |
| [10] | 梁志凯;田世藩 等.[J].金属学报,1995,31(zk):S634. |
| [11] | Tian Shifan;Li Zhou.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:61. |
| [12] | Li Zhou;Tian Shifan .[J].Acta Metal Sinca(English Lettes),1996,9(06):523. |
| [13] | 西姆斯;赵杰.高温合金宇航和工业动力用的高温材料[M].大连:大连理工大学出版社,1992 |
| [14] | Carter W T.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:53. |
| [15] | Jonls R S F.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:72. |
| [16] | Fonsberg U.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:123. |
| [17] | Evans R W;Leatham A G;Brooks R G.Proc.On Powder Metallurgy Group Meeting MS[M].London,1983 |
| [18] | Whitton E D;Grant P S;Bryant D.Proc.Of the Third Inter.Conf.On Spray Forming[C].Cardiff,1996:89. |
| [19] | Fielder H C;Sawyer T F;Kopp R W .[J].GE TeChInfo Ser,1986,86 |
| [20] | Dalal R P;Prichard P D.Proc.Of the Second Int.Conf.On Spray Forming[C].Swansea,1993:141. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%