以聚碳硅烷(PCS)为原料,经C形喷丝板熔融纺丝制备C形、中空截面PCS原丝后,再经不熔化和高温烧成后得到C形、中空截面SiC纤维.文中讨论了纺丝温度、N2压力和收丝速度对两种PCS纤维当量直径和异形度的影响,以及不熔化和烧成工艺对siC纤维截面形状的影响.结果表明,纺丝温度对C形、中空PCS纤维当量直径和异形度影响较大;合适的纺丝工艺和不熔化及烧成条件下可以得到高异形度低当量直径的C形、中空截面SiC纤维.
参考文献
| [1] | YAJIMA S;Hayashi J;Omori M.Development of silicon carbide fibers with high tensile strength[J].Nature,1976(261):683-685. |
| [2] | 冯春祥;王应德;宋永才 .连续碳化硅纤维应用概况[J].材料导报,1997,11(06):64-67. |
| [3] | Youngblood G E;Jones R H et al.Radiation response of SiCbased fibers[J].Journal of Nuclear Materials,1998,258:1551-1556. |
| [4] | Rhee B S;Ryu S K;In S J.Mechanical property of round and C- shaped mesophase carbon fibers[J].Carbon,1990:178-179. |
| [5] | Choi Y J;Lee J I;Shim H B.On C/C composite reinforced with round and C-shaped carbon fibers[A].on Carbon,Buffalo,1993:74-75. |
| [6] | 王应德,王娟,冯春祥,何迎春.异型（三叶型）截面碳化硅纤维制备工艺研究[J].高技术通讯,2000(08):91-93. |
| [7] | 王应德,冯春祥,王娟,宋永才,王军,姚闽,何迎春,薛金根,龙剑锋.具备吸收雷达波功能的三叶型碳化硅纤维研制[J].复合材料学报,2001(01):42-45. |
| [8] | Wang CY.;Wu YL.;Guo CT.;Li MW. .Preparation and microstructure of hollow mesophase pitch-based carbon fibers[J].Carbon: An International Journal Sponsored by the American Carbon Society,1998(12):1749-1754. |
| [9] | 王府梅;赵林;斐豫明 等.纤维截面异形度的研究[J].纺织学报,1991,12(07):300-303. |
| [10] | 刘辉,王应德,冯春祥,吴文华,朱美芳,陈彦模.聚碳硅烷流变性能的研究[J].合成纤维工业,2001(05):23-25. |
| [11] | Ichikawa H;Teranishi H;Ishkawa T .Effective of curing condition on mechanical properties of SiC fiber (Nicalon)[J].Journal of Materials Science Letters,1987,6(04):420-422. |
| [12] | HASEGAWAY;Limuro M;Yajima S.Synthesis of contimuous silicon carbide fiber Part 2:conversion of polycarbosilane fiber into silicon carbide[J].Journal of Materials Science,1980(15):720-728. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%