根据国内外的研究成果对RTM工艺过程中气泡的形成机理及其研究方法、排除方法等进行了全面的分析总结,并且对RTM气泡研究的未来方向进行了展望.
参考文献
| [1] | 王继辉;邱桂杰.LCM成型工艺中气泡形成原理[A].,2001:121-126. |
| [2] | 李彩球,刘晓惠.RTM制品常见缺陷及其对策[J].玻璃钢/复合材料,2002(03):41-43. |
| [3] | 高国强,薛忠民.RTM工艺过程缺陷产生机理分析[J].玻璃钢/复合材料,2001(02):26-29. |
| [4] | Ghiorse S R .Effect of void content on the mechanical properties of carbon/epoxy laminates[J].SAMPE Quarterly,1993,24(02):54-59. |
| [5] | Williams J G;MorrisC E M;Ennis B C .Liquid flow through aligned fiber beds[J].Polymer Engineering and Science,1974,14(06):413-419. |
| [6] | Kuremastsu K;Koishi M .Kinetic studies on void formation during liquid epoxy resin impregnation through polyester non-woven fabric[J].Colloid and Polymer Science,1985,263(06):454-461. |
| [7] | Molnar J A;Trevino L;Lee L J .Liquid flow in molds with prelocated fiber mats[J].Polymer Composites,1989,10(06):414-423. |
| [8] | Peterson R C;Robertson R E.Mechanisms affecting void distribution and elimination in resin transfer molding[A].Chicago USA,1992:63-67. |
| [9] | Mahale A D;Prud' homme R K;Rebenfeld L .Characterization of voids formed during liquid impregnation of non-woven multi-filament glass networks as related to composites processing[J].COMPOSITES MANUFACTURING,1993,4(04):199-207. |
| [10] | 李柏松;王宇光;王继辉 等.BTM冲模过程中的流动行为分析[J].云南大学学报(自然科学版),2002,24(1A):286-289. |
| [11] | Chen Y T;Macosko C W;Davis H T .Wetting of fiber mats for composites manufacturing:Ⅱ.Air entrapment model[J].AICHE Journal,1995,41:2274. |
| [12] | Parnas R S;Phelan F R.The effect of heterogeneous porous media on mold filling in resin transfer molding[J].SAMPE Quarterly,1991(01):53-60. |
| [13] | Kanga M.K.;Leea W.I. .Formation of microvoids during resin-transfer molding process[J].Composites science and technology,2000(12/13):2427-2434. |
| [14] | Patel N;Lee L James .The effects of fiber mat architecture on void formation and removal in liquid composite molding[J].Polvmer Composites,1995,16(05):386-399. |
| [15] | 邓燕平;柴孟贤 .非均相孔隙纤维介质的RTM工艺探讨[J].工程塑料应用,1996,24(06):29-31. |
| [16] | Lundstrom T S.Void formation and transport in RTM process[J].Society for the Advancement of Materials and Process Engineering,1994:108-109. |
| [17] | 冯武,王继辉,孟志华,唐红艳.RTM充模过程的气泡形成研究[J].武汉理工大学学报,2004(11):5-7. |
| [18] | 邵雪明.纺织复合材料预制件多层机织布内气泡形成机理[J].复合材料学报,2003(03):57-63. |
| [19] | Johnson C F;Chavka N G.Perform development for a structure composite crossmember[A].,1988:353. |
| [20] | Ives F;Macdonell R.[A].,1976:18. |
| [21] | Bemardini S.[A].,1980:15. |
| [22] | Hayward J S;Harris B .Effect of process variables on the quality of RTM moulding[J].SAMPE Journal,1990,26(03):39-46. |
| [23] | 张成武.国内BTM成型中应该解决的几个问题[J].玻璃钢/复合材料,1998(02):36-38. |
| [24] | Chan Albert W;Morgan Roger J .Model on formation of rod-like voids in fiber tows[J].SAMPE Quarterly,1993,24:49. |
| [25] | 秦伟 .树脂传递模塑碳纤维织物/环氧复合材料界面性能研究[D].哈尔滨工业大学,2002. |
| [26] | Stabler Wilson R;Tatterson Gary B;Sadler Robert L et al.Void minimization in the manufacture of carbon fiber composites by resin transfer molding[J].SAMPE Quarterly,1992,23:38. |
| [27] | Hutcheon K F .The application of resin transfer moulding to the motor industry[D].The University of Nottingham,1989. |
| [28] | Baig B S;Gibson R F.Vibration assisted liquid composite moulding[A].Dearborn,Michigan USA,1995:645. |
| [29] | Song F;Ayoride E O.Model development in the simulation of vibration assisted liquid composite moulding[A].Dearborn,Michigan USA,1995:203-212. |
| [30] | 汪炜;刘正勋;刘浏 等.树脂传递模塑工艺的压力激波除气装置及方法[P].CN 1718414A,2006. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%