从焊接材料、工艺参数、焊接面连接形式等方面综述了塑料超声波焊接对焊接质量的影响规律.低熔点、高表面摩擦系数的材料容易进行焊接,焊接质量主要受焊接时间、压力等因素的影响,导能筋及连接层的引入有利于提高焊接质量,并指出了塑料超声波焊接的发展方向.
参考文献
| [1] | Gutnik V G;Gorbach N V .Some characteristics of ultrasonic welding of polymers[J].Fibre Chemistry,2002,34(06):426-432. |
| [2] | Alejandro A.An optimization study of the ultrasonic welding of thin film polymers[A].,2004:75-84. |
| [3] | Wijk H V .Process optimization of ultrasonic welding[J].Polymer Engineering and Science,1996,36(09):1165-1176. |
| [4] | Nonhof C J .Estimates for process conditons during the ultrasonic welding of thermoplastics[J].Ploym Eng Sci,1996,36(09):1177-1183. |
| [5] | Jiromaru Tsujino;Misugi Hongoh;Masafumi Yoshikuni et al.Welding characteristics of 27,40 and 67 kHz ultrasonic plastic welding systems using fundamental and higher-resonance frequencies[J].Ultrasonics,2004,42(1-9):131-137. |
| [6] | Gutnik V G;Gorbach N V .Some characteristics of ultrasonic welding of polymers[J].Fibre Chemistry,2002,34(06):426-432. |
| [7] | Fomenko A. v. .Ultrasonic welding of polymer multilayer film materials[J].Сварочное Производство,2001(2):50-52. |
| [8] | 陈传梁 .超声波熔接技术[J].电加工,1989,1(06):15-22. |
| [9] | 刘川 .超声波塑料焊接机理和工艺试验研究[D].大连理工大学,2003. |
| [10] | Wool .Welding of polymer interface[J].Polymer Engineering and Science,1989,29(19):1340-1365. |
| [11] | Erol Sancaktar;Eric Waleker .Effects of calcium carbonate,talc,mica,and glass-fiber fillers on the ultrasonic weld strengh of polypropylene[J].Journal of Applied Polymer Science,2004,94(04):1986-1998. |
| [12] | Shih-Jung Liu;I-Ta Chang .Factors Affecting the Joint Strength of Ultrasonically Welded Polypropylene Composites[J].Polymer Composites,2001(1):132-141. |
| [13] | Shih-Jung Liu;I-Ta Chang .Optimizing the weld strength of ultrasonically welded nylon composites[J].Journal of Composite Materials,2002(5):611-624. |
| [14] | 侯旭光 .超声波塑料焊接工艺参数的研究[D].哈尔滨工业大学,2001. |
| [15] | Matsuoka S I .Ultrasonic welding and characteristics of glass fiber reinforced plastic:comparison between the papermaking method and the impregnation method[J].Journal of Materials Processing Technology,1995,55(3-4):427-431. |
| [16] | Erol Sancaktar .Polymer adhesion by ultrasonic welding[J].Journal of adhsesion Science,1999,13(02):187-190. |
| [17] | Avraham Benatar et al.Ultrasonic welding of thermoplastics in the near-field[J].Polymer Engineering and Science,1989,29(23):1689-1698. |
| [18] | Avraham Benatar et al.Ultrasonic welding of thermoplastics in the far-field[J].Polymer Engineering and Science,1989,29(23):1699-1704. |
| [19] | 卢彤 .塑料超声波焊接过程及质量影响因素研究[D].哈尔滨工业大学,1999. |
| [20] | Tsujino J.;Hasegawa K.;Fujita Y.;Shiraki T.;Okada T.;Tamura T.;Ueoka T. .NEW METHODS OF ULTRASONIC WELDING OF METAL AND PLASTIC MATERIALS[J].Ultrasonics,1996(2/5):177-185. |
| [21] | 吴德光 .论包装塑料膜的焊合与质量[J].云南农业大学学报,1996,11(01):39-44. |
| [22] | 周玉生;阎久春;卢彤 等.塑料超声波焊接过程及质量研究Ⅲ焊接接头质量影响因素分析[J].材料科学与工程,1999,7(zk):60-62. |
| [23] | Harras B.;Vukhanh T.;Cole KC. .OPTIMIZATION OF THE ULTRASONIC WELDING OF PEEK-CARBON COMPOSITES[J].Journal of Reinforced Plastics and Composites,1996(2):174-182. |
| [24] | Liu S J;Liu W F;Chang B C et al.Optimizing the joint strength of ultrasonically welded thermoplastics[J].Advances in Polymer Technology,1999,18(02):125-135. |
| [25] | Chuah YK.;Chang BC.;Liu SJ.;Chien LH. .Effects of the shape of the energy director on far-field ultrasonic welding of thermoplastics[J].Polymer engineering and science,2000(1):157-167. |
| [26] | Tateishi N;North T H;Woodhams R T .Ultrasonic welding using tie-layer materials.Part Ⅰ:Analysis of process operation[J].Polymer Engineering and Science,1992,32(09):600-611. |
| [27] | Tateishi N;North T H;Woodhams R T .Ultrasonic welding using tie-layer materials.Part Ⅱ:Factors affec ting the lap-shear strength of ultrasonic welds[J].Polymer Engineering and Science,1992,32(09):612-619. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%