欢迎登录材料期刊网

材料期刊网

高级检索

采用3,6-二氨基-1,2,4,5-四嗪对多壁碳纳米管(MWNTs)改性处理,使其表面连接氨基或包覆了四嗪有机物,使得复合材料体系的固化反应起始温度和峰顶温度均比纯环氧树脂(EP)低,MWNTs的加入及其表面的接枝或包覆对环氧树脂的固化具有促进作用.由Kissinger和Ozawa公式分别计算了EP/二氨基二苯基砜(DDS)、MWNTs/EP/DDS、四嗪处理MWNTs/EP/DDS固化体系的表观活化能,分别为39.6、55.5和71.9 kJ/mol.MWNTs表面接枝官能团,四嗪处理MWNTs/EP/DDs复合体系的表观活化能明显增加.

参考文献

[1] 李洪胜,冯青平,高彦芳,谢续明.聚合物对多壁碳纳米管的包覆改性研究[J].高分子学报,2006(04):588-592.
[2] Chen Qido;Dai Liming;Gao Mei .Development of a dispension process for carbon nanotubes in an epoxy matrix and the resulting electrical properties[J].Journal of the American Chemical,2001,105:618-623.
[3] Jurewicz K.;Bertagna V.;Beguin F.;Frackowiak E.;Delpeux S. .Supercapacitors from nanotubes/polypyrrole composites[J].Chemical Physics Letters,2001(1/3):36-40.
[4] Hiroaki Miyagawa;Lawrence T.Drzal .Thermo-physical and impact properties of epoxy nanocomposites reinforced by single-wall carbon nanotubes[J].Polymer: The International Journal for the Science and Technology of Polymers,2004(15):5163-5170.
[5] Lu JP .Elastic properties of carbon nanotubes and nanoropes[J].Physical review letters,1997(7):1297-1300.
[6] D. Puglia;L. Valentini;I. Armentano;J. M. Kenny .Effects of single-walled carbon nanotube incorporation on the cure reaction of epoxy resin and its detection by Raman spectroscopy[J].Diamond and Related Materials,2003(3-7):827-832.
[7] Rosu D.;Cascaval CN.;Mustata F.;Ciobanu C. .Cure kinetics of epoxy resins studied by non-isothermal DSC data[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2002(1/2):119-127.
[8] Choi Y K;Gotoh Y;Sugimoto K et al.Processing and characterization of epoxy nanocomposites reinforced by cupstacked carbon nanotubes[J].Polymer,2006,46:11489-11498.
[9] Chou, WJ;Wang, CC;Chen, CY .Thermal behaviors of polyimide with plasma-modified carbon nanotubes[J].Polymer Degradation and Stability,2008(3):745-752.
[10] 刘振海.化学分析手册[M].北京:化学工业出版社,2000
[11] 胡荣祖;史启祯.热分析动力学[M].北京:科学出版社,2001
[12] 李兆敏,王聪,韩克清,余木火,李松年.表面官能团化多壁碳纳米管对环氧树脂固化过程的影响[J].材料科学与工程学报,2007(05):739-742,767.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%