为了获得TC4某框类零件热挤压成形工艺方案及其合适的工艺参数,利用有限元软件Msc/superforge对零件整体热挤压成形和分段热挤压成形两工艺方案进行数值模拟,得出:整体热挤压成形工艺所需挤压力过高,成形困难,不适合该零件;分段热挤压成形工艺所需挤压力低、成形状况良好适合该零件,并以初始挤压温度920℃、挤压速率3 mm/s为成形的合适条件.
参考文献
| [1] | Duan X J;Velay X;Sheppard T .Application of finite clement method in the hot extrusion of aluminium alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,369:66. |
| [2] | Peng Z;Sheppard T .Individual influence of forming parameters on surface recrystallization during aluminium extrusion[J].Modelling and simulation in materials science and engineering,2004(1):43-57. |
| [3] | Peng Z;Sheppard T .Simulation of multi-hole die extrusion[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,367:329. |
| [4] | Zhou J;Li L;Duszczyk J .3D FEM simulation[OL].http://www.yhclgy.com |
| [5] | whole cycle of aluminium extrusion throughout the transient state and the steady state using the updated Lagrangian approach[J].Journal of Materials Processing Technology,2003,134:383. |
| [6] | Chanda T;Zhou J;Duszczyk J .A comparative study on iso-speed extrusion and isothermal extrusion of 6061 Al alloy using 3D FEM simulation[J].Journal of Materials Processing Technology,2000,114:145. |
| [7] | Li L;Zhou J;Duszezyk J .Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation[J].Journal of Materials Processing Technology,2004,145:360. |
| [8] | 王锐,赵国群,娄淑梅,吴向红.铝型材挤压过程非正交网格有限体积法数值模拟与模具优化设计[J].中国机械工程,2009(05):617-621. |
| [9] | JI A,尼克里斯基.钛合金的模锻与挤压[M].北京:国防工业出版社,1982 |
| [10] | 蔡军,李付国,任东升,王家臣.TC4合金叶片热模锻过程的数值模拟[J].宇航材料工艺,2008(06):15-20,25. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%