采用ABAQUS有限元分析软件,建立了错齿BTA钻头钻削环状工件单元切削仿真模型,以45#钢为工件材料,对错齿BTA钻头各刀齿切削不同直径的环状工件进行了模拟仿真,分析了钻削过程中错齿BTA钻头各个刀齿切屑的形成过程与变形特点,研究了环状单元切削力三分量随工件半径的受力分布规律.结果表明,错齿BTA钻头各刀齿切削力分量呈现出随半径增大而增大的非均匀分布规律,并且切削速度和进给量对切削力分布规律几乎没有影响.
参考文献
| [1] | Chin Jihhua;Hsieh Chiti;Lee Liwei .The shaft behavior of BTA deep hole drill tool[J].International Journal of Mechanical Sciences,1996,38(05):461-482. |
| [2] | Dirk Biermann;Alexei Sacharow;Klaus Wohlgemuth .Simulation of the BTA deep-hole drilling process[J].Production Engineering: Research and Development,2009(4/5):339-346. |
| [3] | 王玲君,李桂华,关世玺.深孔钻头的受力及其数值模拟分析[J].工具技术,2011(07):29-31. |
| [4] | D. Biermann;M. Kersting;N. Kessler .Process adapted structure optimization of deep hole drilling tools[J].CIRP Annals,2009(1 CD/ROM):89-92. |
| [5] | 李建,王彪,刘永姜,李道波,付力.深孔钻削的有限元仿真分析[J].机械设计与制造,2012(11):19-21. |
| [6] | 蔡玉俊,段春争,李园园,王敏杰.基于ABAQUS的高速切削切屑形成过程的有限元模拟[J].机械强度,2009(04):693-696. |
| [7] | Dipti Samantaray;Sumantra Mandal;A.K. Bhaduri .A comparative study on Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr–1Mo steel[J].Computational Materials Science,2009(2):568-576. |
| [8] | 马德军.材料弹性模量的仪器化压入测试方法[J].中国有色金属学报,2010(12):2336-2343. |
| [9] | 陈刚,陈小伟,陈忠富,屈明.A3钢钝头弹撞击45钢板破坏模式的数值分析[J].爆炸与冲击,2007(05):390-397. |
| [10] | Liu CR.;Guo YB. .Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer[J].International Journal of Mechanical Sciences,2000(6):1069-1086. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%