提出一种新的牺牲层工艺.先将阳极氧化生成的多孔硅在 300℃的氮气氛下进行退火以稳定其多孔结构,然后将其在 700℃下氧化成为具有多孔结构的二氧化硅.用氧化的多孔硅材料作为牺牲层材料,既可以保留多孔硅牺牲层材料释放迅速的优点,又克服了多孔硅在释放时的局限性.实验运用氧化的多孔硅材料作牺牲层成功制备了悬空振膜和悬臂梁结构.
参考文献
| [1] | Gridchin V A;Lubimskyi V M;Sarina M P .Polysilicon strain-gauge transducers[J].Sensors and Actuators A-physical,1992,30:219-223. |
| [2] | Cho S.T.;Najafi K. .An ultrasensitive silicon pressure-based microflow sensor[J].IEEE Transactions on Electron Devices,1992(4):825-835. |
| [3] | Ning YB.;Tait RN.;Mitchell AW. .FABRICATION OF A SILICON MICROMACHINED CAPACITIVE MICROPHONE USING A DRY-ETCH PROCESS[J].Sensors and Actuators, A. Physical,1996(1/3):237-242. |
| [4] | Pedersen M.;Bergveld P.;Olthuis W. .A SILICON CONDENSER MICROPHONE WITH POLYIMIDE DIAPHRAGM AND BACKPLATE[J].Sensors and Actuators, A. Physical,1997(2):97-104. |
| [5] | Bergqvist J.;Gobet J. .Capacitive microphone with a surface micromachined backplate using electroplating technology[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,1994(2):69-75. |
| [6] | Scheeper P.R.;Olthuis W. .The design, fabrication, and testing of corrugated silicon nitride diaphragms[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,1994(1):36-42. |
| [7] | W. Kronast;B. Mueller;W. Siedel .Single-chip condenser microphone using porous silicon as sacrificial layer for the air gap[J].Sensors and Actuators, A. Physical,2001(3):188-193. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%