采用转相乳化法,选用不同的混合乳化剂对环氧树脂AG-80进行乳化.通过静置沉淀法,比较不同混合乳化剂对其乳化的影响,结果表明乳化效果最好的是乳化剂1601与NP-10的混合乳化剂.粒径分析结果显示乳液的最可几粒径为934.1nm时,乳液稳定性较好.上浆处理后,单纤维复合材料的界面剪切强度较未上浆时有所提高,说明用该上浆剂处理,不仅可达到保护炭纤维表面的目的,而且可以改善炭纤维与基体树脂间的界面粘结.
参考文献
| [1] | 贺福;王茂章.碳纤维及其复合材料[M].北京:科学出版社,1995 |
| [2] | 立早.炭纤维增强复合材料[J].新型炭材料,1999(04):79. |
| [3] | Donn;Wang T K;Peng J C.Carbon fibers[M].New York: Basel. Hong Kong,1998:210-215. |
| [4] | 贺福,赵建国,王润娥.炭纤维开发与炭纤维原丝质量[J].新型碳材料,1998(01):64-74. |
| [5] | Minami H .Sizing agents for carbon yarns[P].US:4751258,1988. |
| [6] | Ogawa H;shima M .Emulsion type sizing agent for carbon fibres process for its preparation, and method for using same[P].US:4420512,1983. |
| [7] | Nakaoka Y;Makino O .Method of sizing carbon fibres[P].US:5688554,1997. |
| [8] | Tang Long-gui;Kardos J L .A review of methods for improving the interfacial adhesion between carbon fibre and polymer matrix[J].Polymer Composites,1997,18(01):100-113. |
| [9] | 余奇平;滕翠青;余木火.国内外炭纤维上浆剂研究现状[J].纤维复合材料,1997(02):50-54. |
| [10] | Taniguchi I;Itoh R;Iwatsuki T et al.Resinous composition for surface-treating reinforcing fibres and surface-treating process[P].US 4219457,1980. |
| [11] | Iroh JO.;Yuan W. .SURFACE PROPERTIES OF CARBON FIBRES MODIFIED BY ELECTRODEPOSITION OF POLYAMIC ACID[J].Polymer: The International Journal for the Science and Technology of Polymers,1996(18):4197-4203. |
| [12] | Herrera·Franco P J;Drzal L T .Comparison of methods for the measurement of fibre/matrix adhesion in composites[J].Composites,1992,23(01):1-27. |
| [13] | Cheng T H;Zhang J;Yumitori S et al.Sizing resin structure and interphase formation in carbon fibre composites[J].Compostes,1994,25(07):661-670. |
| [14] | Gao Shanf-lin;Kin Jang-kyo.Cooling rate influences in carbon fibre/PEEK composites[J].Composites Part A:Applied Science and Manufacturing,2000(31):517-530. |
| [15] | P 贝歇尔.乳状液理论与实践[M].北京:科学出版社,1964 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%