欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料热处理学报
  4. 块体非晶态合金的成分设计准则及玻璃形成能力的表征

材料热处理学报, 2006, 27(1): 28-32. doi: 10.3969/j.issn.1009-6264.2006.01.008

块体非晶态合金的成分设计准则及玻璃形成能力的表征

贺自强 1, , 王新林 2, , 全白云 3,

1.钢铁研究总院功能材料研究所,北京,100081

2.钢铁研究总院功能材料研究所,北京,100081

3.钢铁研究总院功能材料研究所,北京,100081

关键词： 块体非晶态合金 , 成分设计准则 , 玻璃形成能力 , 表征

Development in composition design criterions and characterizing of glass forming ability for bulk amorphous alloys

综述了块体非晶态合金的成分设计准则,如:"混乱"原则、Inoue准则、Senkov准则、电子浓度准则及等原子替代法,表征玻璃形成能力的判据,如:约化玻璃转变温度Trg、αc判据、γ判据、过冷液相区△Tx及临界冷却速率Qc,最后简要讨论了目前存在的问题及发展趋势.

参考文献

[1] Greer A L .Confusion by design[J].Nature,1993,366:304.
[2] Egami T. .Atomistic mechanism of bulk metallic glass formation[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):30-33.
[3] Voronel A;Rabinovich S;Kisliuk A et al.Universality of physical properties of disordered alloys[J].Physical Review Letters,1988,60(23):2402.
[4] Inoue A .High strength bulk amorphous alloys with low critical cooling rates[J].Materials Transactions,1995,36(07):866.
[5] B.S.Murty;K.Hono .Formation of Nanocrystalline Particles in Glassy Matrix in Melt-Spun Mg-Cu-Y Based Alloys[J].Materials transactions,2000(11):1538-1544.
[6] A.Inoue .Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta materialia,2000(1):279-306.
[7] Inoue A;Takeuchi A .Recent progress in bulk glassy,nanoquasicrystalline and nanocrystalline alloys[J].Materials Science and Engineering A,2004,375-377:16.
[8] Akira Takeuchi;Akihisa Inoue .Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys[J].Materials transactions,2000(11):1372-1378.
[9] Senkov ON.;Miracle DB. .A topological model for metallic glass formation[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):34-39.
[10] Miracle D B;Senkov O N;Sanders W S et al.Structure-forming principles for amorphous metals[J].Materials Science and Engineering A,2004,375-377:150.
[11] O.N. Senkov;J.M. Scott .Specific criteria for selection of alloy compositions for bulk metallic glasses[J].Scripta materialia,2004(4):449-452.
[12] Y. M. Wang;J. B. Qiang;C. H. Wong .Composition rule of bulk metallic glasses and quasicrystals using electron concentration criterion[J].Journal of Materials Research,2003(3):642-648.
[13] Wang Y M;Xu W P;Qiang J B et al.The e/a criterion of Zr-based bulk metallic glasses[J].Materials Science and Engineering A,2004,375-377:411.
[14] W. Chen;Y. Wang;J. Qiang;C. Dong .Bulk metallic glasses in the Zr-Al-Ni-Cu system[J].Acta materialia,2003(7):1899-1907.
[15] 张新房,王英敏,彭敏,王清,李德俊,董闯.Zr-Al-Co块状非晶的成分优化[J].金属学报,2004(10):1099-1103.
[16] 王清,王英敏,羌建兵,张新房,王德和,董闯.Cu基Cu-Zr-Al块体非晶合金的成分设计[J].金属学报,2004(11):1183-1188.
[17] Cantor B;Kim K B;Warren P J .Novel multicomponent amorphous alloys[J].Materials Science Forum,2002,386-388:27.
[18] Kim K B;Warren P J;Cantor B .Glass-forming ability of novel multicomponent(Ti33Zr33Hf33)-(Ni50Cu50)-Al alloys developed by equiatomic substitution[J].Materials Science and Engineering A,2004,375-377:317.
[19] Kim KB.;Warren PJ.;Cantor B. .Metallic glass formation in multicomponent (Ti, Zr, Hf, Nb)-(Ni, Cu, Ag)-Al alloys[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):17-22.
[20] Turnbull D .Under what conditions can a glass formed?[J].Contemporary Physics,1969,10(05):473.
[21] Z. P. Lu;H. Tan;Y. Li;S. C. Ng .The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses[J].Scripta materialia,2000(7):667-673.
[22] Waseda Y;Ueno S;Hagiwara M et al.Formation and mechanical properties of Fe-and Co-base amorphous alloy wires produced by in-rotating-water spinning method[J].Progress in Materials Science,1990,34(2-3):149.
[23] Luborsky F E.Amorphous metallic alloys[M].London:Butterworth,1983
[24] T. D. Shen;Y. He;R. B. Schwarz .Bulk amorphous Pd-Ni-Fe-P alloys: Preparation and characterization[J].Journal of Materials Research,1999(5):2107-2115.
[25] T. D. Shen;R. B. Schwarz .Bulk ferromagnetic glasses prepared by flux melting and water quenching[J].Applied physics letters,1999(1):49-51.
[26] Men H.;Kim DH. .Fabrication of ternary Mg-Cu-Gd bulk metallic glass with high glass-forming ability under air atmosphere[J].Journal of Materials Research,2003(7):1502-1504.
[27] 卢柯 .非晶态金属的结构与合金的玻璃形成能力[J].金属学报,1992,28(01):B17.
[28] Lu Z P;Liu C T .A new glass-forming ability criterion for bulk metallic glasses[J].Acta Materialia,2002,50(13):3501.
[29] E.S. Park;D.H. Kim .Formation of Ca-Mg-Zn bulk glassy alloy by casting into cone-shaped copper mold[J].Journal of Materials Research,2004(3):685-688.
[30] Tan H;Zhang Y;Ma D et al.Optimun glass formation at off-eutectic composition and its relation to skewed eutectic coupled zone in the La based La-Al-(Cu,Ni) pseudo ternary system[J].Acta Materialia,2003,51(15):4551.
[31] D.H. Bae;J.M. Park;J.H. Na .Deformation behavior of Ti-Zr-Ni-Cu-Be metallic glass and composite in the supercooled liquid region[J].Journal of Materials Research,2004(3):937-942.
[32] 张志豪,刘新华,周成,谢建新.Zr基大块非晶合金的超塑性成形性能[J].中国有色金属学报,2004(07):1073-1077.
[33] Takeuchi K.;Inoue A. .Quantitative evaluation of critical cooling rate for metallic glasses[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):446-451.
[34] Anderson P W .[J].Science,1995,267:1615.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net