欢迎登录材料期刊网

材料期刊网

高级检索

研究回火温度对15钢冷变形低碳马氏体塑性的影响.获得板条马氏体的试样经大量冷拔变形后在200~600℃进行了回火处理并测试了抗拉强度和伸长率.结果表明,随回火温度的提高拉伸强度连续降低,且伸长率在200~500℃范围内始终保持不变,当回火温度超过500℃后伸长率才开始急剧上升.而未冷变形的低碳马氏体钢在同温度范围回火时其伸长率随回火温度的提高连续增长.透射电镜分析结果表明,这种冷变形低碳马氏体的回火特性是,由于马氏体再结晶晶界上大量析出渗碳体所致.

参考文献

[1] Yu M T;Topper T H;Wang L .Effect of microstructure on the mechanical behaviour of a low carbon,low alloy steel[J].International Journal of Fatigue,1988,10(04):249-255.
[2] R.C.Thomosn;M.K.Miller .Carbide precipitation in martensite during the early stages of tempering Cr- and Mo-containing low alloy steels[J].Acta materialia,1998(6):2203-2213.
[3] M.P.Staiger;C.H.J.Davies .Microalloying with titanium to improve drawability in low carbon wire-rod steels[J].Materials Science Forum,1998(0):575-582.
[4] Lis A.K.; .Mechanical properties and microstructure of ULCB steels affected by thermomechanical rolling, quenching and tempering[J].Journal of Materials Processing Technology,2000(1/3):212-218.
[5] 赵新,荆天辅,高聿为,王威,周继锋.板条马氏体大变形轧制工艺的晶粒细化机制[J].钢铁研究学报,2004(06):69-73.
[6] 杜树昌.回火温度对低碳马氏体形变强化的影响[J].金属热处理,1994(04):25-27.
[7] M. R. Suresh;I. Samajdar;A. Ingle .Structure-property changes during hardening and tempering of new ultra high strength medium carbon low alloy steel[J].Ironmaking & Steelmaking: Products and applications,2003(5):379-384.
[8] Saeglitz M;Krauss G .Deformation,fracture and mechanical properties of low-temperature-tempered martensite in SAE 43xx steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1997,28(02):377-387.
[9] Dongyu Liu;Bingzhe Bai;Hongsheng Fang;Wenzheng Zhang;Jialin Gu;Kaidi Chang .Effect of tempering temperature and carbide free bainite on the mechanical characteristics of a high strength low alloy steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):40-44.
[10] 胡正飞,吴杏芳,王春旭.新型高钴镍合金钢的微观组织和性能[J].材料研究学报,2002(03):331-336.
[11] 王笑天;谈育煦;丁秉钧 等.低碳马氏体型高强度钢的设计与开发[J].西安交通大学学报,1994,28(07):10-14.
[12] 武会宾,尚成嘉,苑少强,杨善武,王学敏,贺信莱.超细化低碳贝氏体钢的回火组织稳定性及力学性能[J].材料热处理学报,2004(06):65-70.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%