采用超音速微粒轰击技术在38CrSi合金钢表面制备了厚度约为25μm纳米晶层.利用X射线衍射、扫描电镜和透射电镜对表面结构进行分析.纳米结构层的最表面层的晶粒尺寸约为16nm,晶粒尺寸随着距表面距离的增加而增大.利用纳米压痕仪对表面纳米结构层的力学性能进行研究,结果表明,当表面晶粒尺寸降低到纳米量级时力学性能明显改善,最表面纳米结构层的硬度是基体的2倍左右,并服从Hall-Petch关系;表面纳米结构层的弹性恢复系数明显提高;利用该方法制备的纳米晶对弹性模量的影响较小;对表面纳米化样品进行低温退火处理可使纳米结构层的性能更加稳定.分析表明表面纳米结构层力学性能的改善主要是表面晶粒细化的结果.
参考文献
| [1] | LU K;LU JIAN .Surface nanorystallization(SNC)of metallic materials-presentation of the concept behind a new approach[J].Journal of Materials Science and Technology,1999,15(03):193-197. |
| [2] | K. Lu;J. Lu .Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):38-45. |
| [3] | TAO N R;SUI M L;LU J et al.Surface nanocrystalization of iron induced by ultrasonic shot peening[J].Nano-Structured Materials,1999,11(04):433-440. |
| [4] | 雍兴平,刘刚,吕坚,卢柯.低碳钢表面纳米化处理及结构特征[J].金属学报,2002(02):157-160. |
| [5] | 张洪旺,刘刚,黑祖昆,吕坚,卢柯.表面机械研磨诱导AISI 304不锈钢表层纳米化Ⅱ.晶粒细化机理[J].金属学报,2003(04):347-350. |
| [6] | LIU G;WANG S C;LOU X F et al.Low carbon steel with nanostructured surface layer induced by hign-energy shot peening[J].Scripta Materialia,2001,44:1791-1795. |
| [7] | X.H. CHEN;J. LU;L. LU .Tensile properties of a nanocrystalline 316L austenitic stainless steel[J].Scripta materialia,2005(10):1039-1044. |
| [8] | 熊天英,刘志文,李智超,吴杰,金花子,李铁藩.超音速微粒轰击金属表面纳米化新技术[J].材料导报,2003(03):69-71. |
| [9] | Klug H P;Alacander L E.X-ray diffraction procedures for polycrystalline and amorphous materials[M].New York:Wiley,1974:661. |
| [10] | Nairong TAO,Weiping TONG,Zhenbo WANG,Wei WANG,Manling SUI,Jian LU,Ke LU.Mechanical and Wear Properties of Nanostructured Surface Layer in Iron Induced by Surface Mechanical Attrition Treatment[J].材料科学技术学报（英文版）,2003(06):563-566. |
| [11] | P.G.Sanders;J.A.Eastman;J.R.Weertman .Elastic and tensile behavior of nanocrystalline copper and palladium[J].Acta materialia,1997(10):4019-4025. |
| [12] | X. Y. Wang;D. Y. Li .Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(7/12):836-845. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%