利用改进的裂纹柔度法对精密铜合金板带轧向残余应力进行了检测.利用对称组合应变测量的方法实现剪应力与轧向残余应力的分离,分别计算出板带的轧向残余应力和剪应力分布,计算结果与板形检测结果取得一致.结果表明:板带分切过程产生的压应力分布区域(Bc)在2.5t～4.7t(t-板带厚度)之间,对板形的影响范围(Bs)在5.3t～10t之间,Bs对分切工艺参数变化反应敏感可以作为板带分切质量和冲裁余量的评定参数.
参考文献
| [1] | 赵冬梅,董企铭,刘平,金志浩,康布熙.高强高导铜合金合金化机理[J].中国有色金属学报,2001(z2):21-24. |
| [2] | 张旦闻,赵冬梅,董企铭,刘平,刘宏昭.Cu-Ni-Si合金二次时效时的再结晶行为[J].中国有色金属学报,2004(07):1241-1245. |
| [3] | Yoji Mitani .The Measurement Method for the Slit Strain of Copper and Copper Alloy Strip[J].伸銅技術研究会誌,2000(0):37-44. |
| [4] | 张旦闻,刘宏昭,路俊攀,刘平.转动结构在精密铜合金板带残余应力检测中的应用和分析[J].中国有色金属学报,2006(01):130-135. |
| [5] | 周长林;陈中兴;袁柳梅.钢带的板形与内应力关系研究[J].上海钢研,1998(06):24-27. |
| [6] | Beghini M;Bertini L .Residual stress modeling by experimental measurements and finite element analysis[J].Journal of Strain Analysis,1990,25(02):103-108. |
| [7] | Jon E. Rankin;Michael R. Hill .Measurement of Thickness-Average Residual Stress Near the Edge of a Thin Laser Peened Strip[J].Journal of engineering materials and technology,2003(3):283-293. |
| [8] | Michael B Prime .Residual stress measurement by successive extension of a slot:The crack compliance method[J].Applied Mechanics Reviews,1999,52(02):75-96. |
| [9] | Michael B. Prime;Michael R. Hill .Residual stress, stress relief, and inhomogeneity in aluminum plate[J].Scripta materialia,2002(1):77-82. |
| [10] | Prime MB;Hill MR .Measurement of fiber-scale residual stress variation in a metal-matrix composite[J].Journal of Composite Materials,2004(23):2079-2095. |
| [11] | Cheng W;Finnie I .Measurement of residual stress distributions near the toe of an attachment welded on a plate using the crack compliance method[J].Engineering Fracture Mechanics,1993,46(01):79-91. |
| [12] | 刘毓舒.织构材料X射线应力分析的线性方程组[J].上海交通大学学报,1999(02):135-138. |
| [13] | Manabu Kiuchi .Theory and Measurement of Residual Stresses in Sheets, Bars and Tubes[J].伸銅技術研究会誌,2000(0):30-36. |
| [14] | 路俊攀.铜及铜合金板带材分条变形测量方法探讨[J].理化检验-物理分册,2004(03):132-134. |
| [15] | Michael B. Prime;Michael R. Hill .Uncertainty, Model Error, and Order Selection for Series-Expanded, Residual-Stress Inverse Solutions[J].Journal of engineering materials and technology,2006(2):175-185. |
| [16] | 张旦闻,刘宏昭,刘平.裂纹柔度法在7075铝合金板残余应力检测中的应用[J].材料热处理学报,2006(02):127-131. |
| [17] | 卿伟杰,杨荃.冷轧带钢整体和局部屈曲及后屈曲的有限元分析[J].北京科技大学学报,2000(04):377-380. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%