采用化学镀铜工艺在石墨颗粒表面镀上一层金属铜,通过粉末冶金方法制备了铜/石墨复合材料,研究了石墨颗粒表面铜镀层在不同处理温度下的球化问题和改善复合材料界面结合的作用效果.结果表明,石墨颗粒表面铜镀层有利于改善铜基石墨复合材料的界面结合,使复合材料力学性能提高;处理温度较高时,表面铜镀层有熔融球化的趋势,当复合材料烧结温度超过石墨镀铜层的完全球化温度时,镀铜石墨粉改善界面结合的效果逐渐降低,直至消失.
参考文献
| [1] | 王文芳;许少凡;应美芳 等.用镀铜石墨粉制备铜-石墨复合材料[J].机械工程材料,1999,23(02):41-43. |
| [2] | 朱满康.铜镀覆石墨粉末的研制及其性能[J].炭素,1996(03):22-25. |
| [3] | S. F. Moustafa;S. A. El-Badry;A. M. Sanad .Effect of graphite with and without copper coating on consolidation behaviour and sintering of copper-graphite composite[J].Powder Metallurgy,1997(3):201-206. |
| [4] | S. F. Moustafa;S. A. El-Bardy;A. M. Sanad;B. Kieback .Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2002(7/8):699-710. |
| [5] | 蒋文忠.石墨粉末镀铜工艺及性能的研究[J].炭素技术,2002(05):23-25. |
| [6] | 黄鑫,王贵青,贺子凯.石墨粉表面化学镀铜工艺研究[J].机械工程材料,2002(11):33-35. |
| [7] | 沃丁柱.复合材料大全[M].北京:化学工业出版社,2000:235-237. |
| [8] | Ambier J.;Bourda C. .Modification in the microstructure of materials with air-break switching at high currents[J].IEEE transactions on components, hybrids, and manufacturing technology,1991(1):153-161. |
| [9] | P. Appendino;V. Casalegno;M. Ferraris;M. Grattarola;M. Merola;M. Salvo .Joining of C/C composites to copper[J].Fusion engineering and design,2003(0):225-229. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%