论文介绍了变频电机绝缘破坏的研究进展.根据我国对变频电机绝缘破坏研究的实际状况及条件,提出了在跟踪国外新近研究动态的基础上,应尽快开展的若干研究内容或方向.
参考文献
[1] | 陈国呈.PWM变频调速及软开关电力变流技术[M].北京:机械工业出版社,2001 |
[2] | 张燕宾.SPWM变频调速应用技术[M].北京:机械工业出版社,1997 |
[3] | 黄济荣.电力牵引交流传动与控制[M].北京:机械工业出版社,1999 |
[4] | H.W.Penrose.E1ectric Motor Repair for Low Voltage Induction Motors in PWM Inverter Duty Environments[A].,1997:841-848. |
[5] | 刘学忠,徐传骧.PWM变频调速电动机端子上电压特性的研究[J].电工技术学报,2000(05):26-29. |
[6] | 刘学忠,徐传骧.PWM变频调速电动机端子上过电压的抑制[J].中国电机工程学报,2001(08):84-88. |
[7] | Bonnett A.H. .A comparison between insulation systems available for PWM-inverter-fed motors[J].IEEE Transactions on Industry Applications,1997(5):1331-1341. |
[8] | Bonnett A.H. .Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors[J].IEEE Transactions on Industry Applications,1996(2):386-392. |
[9] | S BELL et al.Will your Motor Insulation Survive a Mew Adjustable-frequency Drive[J].IEEE Transactions on Industry Applications,1997,33(05):1307-1311. |
[10] | David Leggate;Jeff Pankau;David W. Schlegel;Russel J. Kerkman;Gary L. Skibinski .Reflected waves and their associated current[J].IEEE Transactions on Industry Applications,1999(6):1383-1392. |
[11] | J. L. Guardado;V. Venegas;E. Melgoza;K. J. Cornick;J. L. Naredo .Transient overvoltages in electrical motors during sequential pole closure[J].IEEE Transactions on Energy Conversion,1999(4):1057-1064. |
[12] | Persson E. .Transient effects in application of PWM inverters to induction motors[J].IEEE Transactions on Industry Applications,1992(5):1095-1101. |
[13] | D.B.Hyypio.Effects of Risetime and Cable Length on Motor Insulation Degradation Resulting from Operation on PWM Voltage Source Inverters[A].,1997:TC32.l-2.3. |
[14] | Bentley J.M.;Link P.J. .Evaluation of motor power cables for PWM AC drives[J].IEEE Transactions on Industry Applications,1997(2):342-358. |
[15] | E.J.Bulington.Cable Ahernatives for PWM AC Drive Applications[A].,1999:247-259. |
[16] | G.J.Kerkman.PWM Inverters and Their Influence on Motor Over-Voltage[A].,1997:103-113. |
[17] | Kerkman R.J.;Leggate D. .Interaction of drive modulation and cable parameters on AC motor transients[J].IEEE Transactions on Industry Applications,1997(3):722-731. |
[18] | G.Skibinski.Cable Characteristics and Their Infiuence on Motor Over-Voltages[A].,1997:114-121. |
[19] | A.Hussein.Modeling and Simulation of Traveling Waves in Induction[A].,1997:128-134. |
[20] | D.B.Hyypio.Simulation of Cable and Winding Response to Steep-fronted Voltage Waves[A].,1995:800-806. |
[21] | G.Skibinski.Reflected Wave Modeling Techniques for PWM AC Motor Drives[A].,1998:1021-1029. |
[22] | E P Dick et al.Equivalent Circuits for Simulation Switching Surges at Motor terminals[J].IEEE Transactions on Energy Conversion,1988,3(03):696-704. |
[23] | A Jouanne et al.Design Considerations for an Inverter Output Filter to Mitigate the Effects of Long Motor Leads in ASD Application[J].IEEE Transactions on Industry Applications,1997,33(05):1138-1145. |
[24] | A Jouanne et al.Filtering Techniques to Minimize the Effect of Long Motor Leads on PWM Invener-Fed AC Motor Drive Systems[J].IEEE Transactions on Industry Applications,1996,32(04):919-925. |
[25] | G.Skibinski.Design Methodology of a Cable Terminator to Reduce Reflected Voltage on AC Motor[A].,1996:153-161. |
[26] | S.J.Kim.Novel Filter Design for Suppression of High Voltage Gradient in Voltage-Fed PWM Inverter[A].,1997:122-127. |
[27] | Melhorn C.J.;Tang L. .Transient effects of PWM drives on induction motors[J].IEEE Transactions on Industry Applications,1997(4):1065-1072. |
[28] | J P Bellomo.Characterization of Voltage Shapes Acting on the Insulation of Rotating Machines Supplied by Inverters[M].Proc. of 4th ICPADM, Brisbane Australia, July 3-8,1994:792-795. |
[29] | A Narang .Measurement and Analysis of Surge Distribution in Motor Stator Wingdings[J].IEEE Transactions on Energy Conversion,1989,4(03):126-134. |
[30] | Guardado J.L.;Cornick K.J. .The effect of coil parameters on the distribution of steep-fronted surges in machine windings[J].IEEE Transactions on Energy Conversion,1992(3):552-559. |
[31] | Guardado J.L.;Carrillo V. .Calculation of interturn voltages in machine windings during switching transients measured on terminals[J].IEEE Transactions on Energy Conversion,1995(1):87-94. |
[32] | L.Gubbala.Voltage Distribution in the Winding of an Motor Subjected to High dv/dt PWM Voltages[A].,1995:579-585. |
[33] | J L Guardado et al.A Computer Model for Calculation Steep-fronted Surge Distribution in Machine Winding[J].IEEE Transactions on Energy Conversion,1989,4(01):93-101. |
[34] | J L Guardado et al.A There-phase Model for Surge Distribution Studies in Electrical Machine[J].IEEE Transactions on Energy Conversion,1997,12(01):24-31. |
[35] | J L Guardado et al.Calculation of Machine Windings Electrical Parameters at High Frequencies for Switching Transients Studies[J].IEEE Transactions on Energy Conversion,1995,11(01):33-40. |
[36] | W W L Keerthipala et al.The Effect of Laminations on Steep Fronted Surge Propagation in Large A.C. Motor Coil[J].IEEE Transactions on Energy Conversion,1990,5(01):84-90. |
[37] | S Ogasawara et al.Modeling and Damping of High-Frequency Leakage Currents in PWM Inverter-Fed AC Motor Drive System[J].IEEE Transactions on Industry Applications,1997,33(05):1105-1113. |
[38] | Yifan Tang .Analysis of steep-fronted voltage distribution and turn insulation failure in inverter-fed form-wound AC motor[J].IEEE Transactions on Industry Applications,1998(5):1088-1096. |
[39] | Mike Melfi;A. M. Jason Sung;Sidney Bell;Gary L. Skibinski .Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters[J].IEEE Transactions on Industry Applications,1998(4):766-775. |
[40] | G.Suresh.Analysis of the Effect of Feeder Cable on the Stator Winding Voltage Stress in a PWM Induction Motor Drive[A].,1997:407-412. |
[41] | Mbaye A.;Bellomo J.P. .Electrical stresses applied to stator insulation in low-voltage induction motors fed by PWM drives[J].IET electric power applications,1997(3):191-198. |
[42] | G.Skibinski.Assessing AC Motor Dielectric Withstand Capability to Reflected Voltage Stress Using Corona Testing[A].,1996:694-702. |
[43] | G.Suresh.Predicting the Transient Effects of PWM Voltage Waveform on the Stator Wingdings of Random Wound Induction Motor[A].,1997:135-141. |
[44] | S Islam.An Equivalent Circuit for Calculation of Interturn Voltage Distribution of Stator Windings in the Presence of Slot Discharges[M].Proceeding of 5th ICPADM,Seoul,Korea,May 25-30,1997:507-510. |
[45] | T.Lebey.Influence of Some Voltage Waveform Characteristics on the Partial Discharge Patters: Application to a PWM Power Supply[A].,1999:627-630. |
[46] | H Zhu.Pulse Propagation in Rotating Machines and its Relationship to Partial Discharge Measurements[M].Proc. of 1992 Intern. Symp. on Electrical Insulation,1992:41l-414. |
[47] | S.R.Campbell.Examples of Stator Winding Partial Discharge due to Inverter Drives[A].Anaheim,CA,USA,2000:231-234. |
[48] | K.Muller.An Approach for Measuring Partial Discharges in PWM Inverter Driven Induction Machines[A].,2000:227-230. |
[49] | Mbaye A.;Grigorescu F. .Existence of partial discharges in low-voltage induction machines supplied by PWM drives[J].IEEE transactions on dielectrics and electrical insulation: A publication of the IEEE Dielectrics and Electrical Insulation Society,1996(4):554-560. |
[50] | C.Hudon.Evidence of Charge Injection Resulting from Fast Pulse Operation of Inverter Drives[A].Atlanta,1998:714-718. |
[51] | 高生强;杨士勇.高性能聚酰亚胺材料在电工电子工业中的应用[J].绝缘材料通讯,1999(01):11-18. |
[52] | 张志昌.漆包线的现状及其发展动向[J].电线电缆,1999(02):2-8. |
[53] | 王寿泰,郝铭波.耐电晕PI薄膜及其耐电晕寿命评定方法的研究[J].绝缘材料通讯,2000(03):27-30. |
[54] | 王寿泰.新型耐电晕材料[J].绝缘材料通讯,1999(01):11-18. |
[55] | J·P·Bellomo.Ageing Properties of Polyimide and Polyester Film: Experimental Results and Discussion[A].Arlington,Virginia,USA,June 7-10,1998:177-180. |
[56] | J·P·Bellomo.Influence of Rise Time on the Dielectric Behavior of Stator Insulation Material[A].San Francisco,October 20-23,1996:842-845. |
[57] | J. P. Bellomo;P. Castelan;T. Lebey .The effect of pulsed voltages on dielectric material properties[J].IEEE transactions on dielectrics and electrical insulation: A publication of the IEEE Dielectrics and Electrical Insulation Society,1999(1):20-26. |
[58] | J·P·Bellomo.Electrical Aging of Stator Insulation of Low Voltage Rotating Machines Supplied by Inverters[A].Montreal Quebec,Canada.June 16-19,1996:210-213. |
[59] | J.P.Bellomo.Lifetime Determination of Polyimide Under Square Voltage Waveforms[A].,1997:419-423. |
[60] | J P Bellomo et al.Study of the Ageing of the Different Dielectric Materials under Specific Electrical Constraints[Z].Proc. of 4th ICPADM, Brisbane, Australia, July 3-8,1994. |
[61] | C.Petrarca.Investigation on Performances of Insulation Materials for Inverter-Fed Traction Motors[A].,1998:564-567. |
[62] | G.G.Gao.Studies on the Insulation Life of Adjustable Speed Drive(ASD)-Fed Motors Under Accelerated Aging Condition[A].,1999:581-584. |
[63] | M C Ratra.Combined Stress Ageing of Magnet Wire Enamels[M].Proceeding of the 3rd ICPADM, July 8-12, Tokyo, Japan,1991:707-710. |
[64] | V.Divljakovic.Multifactor Aging of Electrical Machines Energized by Standard PWM Drives[A].,1996:808-812. |
[65] | C.Hudon.Turn Insulation Aging of Motors Exposed to Fast Pulses of Inverter Drives[A].,1997:413-417. |
[66] | R.H.Rehder.Preliminary Evaluation of Motor Insulation for Variable Speed Application[A].,1993:333-336. |
[67] | M.Winkeler.Evaluation of Electrical Insulation Resins for Inverter Duty Application[A].,1997:145-149. |
[68] | J.Anderson.Stress Related Failures and Testing of Inverter Driven Motors[A].,1997:151-154. |
[69] | Katz M.;Theis R.J. .New high temperature polyimide insulation for partial discharge resistance in harsh environments[J].IEEE Electrical Insulation Magazine,1997(4):24-30. |
[70] | N.Foulon.Investigation of the Failure Mechanism of Insulation Subjected to Repetitive Fast Voltage Surge[A].,1997:401-406. |
[71] | W.Yin.Dielectric Integrity of Magnet Wire Insulation Under Multi-Stresses[A].,1995:267-261. |
[72] | W Yin .Failure Mechanism of Winding Insulation in Inverter-Fed Motor[J].IEEE Electron Device Letters,1997,13(06):18-23. |
[73] | Weijun Yin .Dielectric properties of an improved magnet wire for inverter-fed motors[J].IEEE Electrical Insulation Magazine,1997(4):17-23. |
[74] | W.Yin.Critical Factors for Early Failure of Magnet Wires in Inverter-Fed Motor[A].,1995:258-261. |
[75] | W.Yin.Improved Magnet Wire for Inverter-Fed Motors[A].,1997:379-382. |
[76] | R.J.Beeckman.Studies on Magnet Wire Degradation with Inverter-driven Motors[A].,1997:383-387. |
[77] | R.J.Beeckman.Inverter Drive Issues and Magnet Wire Responses[A].,1999:139-141. |
[78] | M Kaufhold.Endurance of the Winding Insulation of Induction Machines Applying Frequency Inverters[M].8th Intern. Symp. on High Voltage Engineering, Japan, August 23-27,1993:121-124. |
[79] | M Kaufhold et al.Failure Mechanism of the Interturn Insulation of Low Voltage Electric Machines Fed by Pulse-controlled Inveters[J].IEEE Electron Device Letters,1996,12(05):9-16. |
[80] | D.A.Metzler.The Effect of Mechanical Deformation and Wire Size on the Ozone Erosion Resistance of Inverter-Duty Magnet Wires[A].,1997:389-395. |
[81] | B.Cerutti.Characterization of Insulated Conductors for High Frequency Applications[A].,1999:73-576. |
[82] | B.Cerutti.Insulation Life Tests of Multiple Insulated Wire Cables in Presence of High Frequency and High Temperature[A].Anaheim,USA,2000:89-92. |
[83] | V.Divljakovic.Ageing of Magnet Wire in the Presence of Variable Frequency,High Rise Time and High Voltage Pulses[A].,1994:391-399. |
[84] | S.Grzybowski.Accelerated Aging Tests on Magnet Wires under High Frequency Pulsing Voltage and High Temperature[A].,1999:555-558. |
[85] | O.B.Hyypio.A Model for Predicting Voltage Endurance of Magnet Wire Film Subject to Inverter PWM Voltage Waveforms with Transient Overshoots[A].,1997:24-30. |
[86] | J P Bellomo.Lifetime of Conventinal and Corona Resistant Enamels. Conference Record of the 1998 IEEE International Symposium on Electrical Insulation[C].Arlington, USA. June 7-10,1998:173-176. |
[87] | C.Hudon.Long Term Behavior of Corona Resistant Insulation Compared to Standard Insulation of Magnet Wire[A].Anaheim,CA,USA,2000:13-16. |
[88] | E.A.Feilat.Multiple Stress Aging of Magnet Wire by High Frequency Voltage Pulses and High Temperatures[A].Anaheim,CA,USA,2000:157-160. |
[89] | W.J.Sarjeant.Preliminary Results on the Effect of an Inverter Environment on Coated and Uncoated MW35 Twisted Pair Wires[A].Anaheim,CA,USA,2000:222-226. |
[90] | F.Pohlmann.Investigation of Magnet Wire Enamels and Impregnants Especially for Inverter-fed Motors[A].,2000:587-591. |
[91] | W Yin .Pulse Voltage Surge Resistant Magnet Wire[P].AmericanPatent.US 6060162,US 6180888,1997. |
[92] | J J Keane .Corona-resistant Wire Enamel Compositions and Conductors Insulated Therewith[P].US:4546041,1983. |
[93] | C W McGregor .Magnet Wire Insulation for Inverter Duty Motors[P].American Patent,US 6100474,2000. |
[94] | J E Hake .Method of Coating Electrical Conductors with Corona Resistant Multi-Layer Insulation[P].US:6056995,2000. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%