对全片层结构的γ-TiAl基合金Ti-44Al-8Nb-1B在700℃大气环境中的表面氧化行为进行了系统的研究.研究发现,这种高铌合金表面形成的氧化层由TiO2和Al2O3混合构成.这种高Nb合金的表面氧化导致了室温塑性的明显降低,但强度指标变化不大.相对于单纯手动抛光,手动+电解抛光能够适度提高合金表面的氧化抗力,但这种提高并未带来拉伸性能的增加.研究还发现,1 000 h氧化后,样品表面的硼化物和晶界表现出较片层晶团严重的氧化行为,分析认为这分别是硼化物缺铝和在晶界各种元素扩散较快的缘故.
参考文献
[1] | Pérez P;Jiménez J A;Frommeyer G.Oxidation behaviour of a Ti-46Al-1Mo-0.2Si alloy:the effect of Mo addition and alloy microstructure[J].Materials Scienc and Engineering A,2000(284):138-147. |
[2] | 莱茵斯C;皮特尔斯M;陈振华.钛与钛合金[M].北京:化学工业出版社,2005:183-184. |
[3] | Huang Z W;Cong T.Microstructural instability and embrittlement behaviour of an Al-lean,high-Nb γ-TiAl-based alloy subjected to a long-term thermal exposure in air[J].Intermetallics,2010(18):161-172. |
[4] | W. Lu;C.L. Chen;L.L. He;F.H. Wang;J.P. Lin;G.L. Chen .(S)TEM study of different stages of Ti-45Al-8Nb-0.2W-0.2B-0.02Y alloy oxidation at 900 ℃[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2008(4):978-988. |
[5] | Huang Z W;Zhu D G.Thermal stability of Ti-44Al-8Nb -1B alloy[J].Intermetallics,2008(16):156-167. |
[6] | Cheng T T.The mechanism of grain refinement in TiAl alloys by boron addition-an altemative hypothesis[J].Intermetallics,2000(08):29-37. |
[7] | 丁晓非,沈勇,王秀敏,谭毅,王富岗.W,Cr对高铌γ-TiAl基合金高温抗氧化性能的影响[J].稀有金属材料与工程,2004(05):543-547. |
[8] | Taniguchi S.;Zhu YC.;Zhang HX.;Shibata T.;Uesaki K. .Influence of niobium ion implantation on the oxidation behaviour of TiAl under thermal cycle conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):223-232. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%