日益提高的需要对钛合金的组织和性能提出了更高的要求.强韧化处理是综合提高钛合金力学性能的重要发展方向.文章概述了钛合金强韧化机理和当前强韧化技术和方法的发展状况,重点是解决其存在的不足,开发其工程化应用.
参考文献
| [1] | 那顺桑;姚青芳.金属强韧化原理与应用[M].北京:化学工业出版社,2006 |
| [2] | 张树松.钢的强韧化机理与技术途径[M].北京:兵器工业出版社,1995 |
| [3] | 张菊梅,蒋百灵,王志虎,袁森.镁合金强韧化的研究现状及发展[J].热加工工艺,2006(08):65-67,70. |
| [4] | 周兆锋,甘卫平.Al-Li合金强韧化机理及途径[J].轻合金加工技术,2003(06):46-49. |
| [5] | Furuta T;Nishino K;Hwany J H.Development of multi functional titanium alloy " GUM METAL"[A].Hamburg:Wiley-Vch,2004:1519-1522. |
| [6] | Kuramoto S;Furuta T;Hwang J H.Origin for "super"properties in "Gum Metal"[A].Hamburg:Wiley-Vch,2004:1527-1534. |
| [7] | Wu M H;Russo P A;Ferrero J G.Pseudoelastic Beta Ti-Mo-V-Nb-A1 Alloys[A].Hamburg:Wiley-Vch,2004:1535-1539. |
| [8] | Semiatin S L;Seetharaman V;Ghosh A K .Plastic flow,microstructure evolution,and defect formation during primary hot working of titanium and titanium aluminide alloys with lamellar colony microstructures[J].Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences,1999,357:1487. |
| [9] | Ogden H R;Jaffee R I .The effects of carbon,oxygen,and nirtogen on the mechanical properties of titanium and titanium alloys[R].TML Report,No.20[R].Ohio:Battelle Memorial Institute,1955. |
| [10] | W.W. Cheng;J.H. Chern Lin;C.P. Ju .Effect of Alloying Addition on Castability and Other Properties of Titanium[J].Transactions of the American Foundrymen's Society,2001(109):987-996. |
| [11] | Salishchev G A;Zherebtsov S V;Galeyev R M.Evolution of microstructure and mechanical behavior of titanium,during warm multiple deformation[A].Warrendale:TMS,2002:123-131. |
| [12] | 张旺峰,曹春晓,李兴无,马济民,朱知寿.钛合金组织特征参数与拉伸性能预测[J].稀有金属材料与工程,2009(06):972-975. |
| [13] | Chait R;Desisto T S .The influence of grain size on the high cycle fatigue crack initiation of a metastable beta Ti alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1977,8(06):1017-1020. |
| [14] | Okada M.Acceleration of α precipitation and strengthening of Ti-15V-3Cr-Sn-3A1 alloy by two step aging[A].Warrendale,PA:TMS,1992:1551-1556. |
| [15] | 周义刚,张宝昌.钛合金近β锻造研究[J].航空学报,1989(01):60. |
| [16] | 张庆春 .钛合金高温形变强韧化工艺通过部级鉴定[J].钛工业进展,1993,10(02):44-45. |
| [17] | 周义刚;曾卫东;李晓芹 等.钛合金高温形变强韧化机理[J].金属学报,1999,35(01):45. |
| [18] | 周义刚;曾卫东;俞汉清 .钛合金高温形变强韧化研究[J].机械工程学报,1996,32(05):70. |
| [19] | 朱知寿;王庆如;郑永灵 .钛合金准β锻造工艺[P].中国,01131237.8,2001-09-04. |
| [20] | 朱知寿,王庆如,郑永灵.准β锻造钛合金的组织与性能研究[J].金属学报,2002(z1):382-384. |
| [21] | 朱知寿,王庆如,郑永灵,王新南,周宇.损伤容限型钛合金新型β锻造工艺[J].中国有色金属学报,2004(z2):13-16. |
| [22] | Segal V M .Equal channel angular extrusion:from macromechanics to structure formation[J].Materials Science and Engineering,1999,A271:322-333. |
| [23] | 王幸运,赵西成,杨西荣,王成.ECAP制备超细晶钛的力学性能研究[J].热加工工艺,2009(10):10-11,15. |
| [24] | 付文杰,赵西成,杨西荣,郑艳霞.室温等径弯曲通道变形工业纯钛的组织及性能研究[J].热加工工艺,2007(18):21-23,61. |
| [25] | Nozue A;Ohki K;Okubo T .[J].Journal of the Japan Institute of Metals,1990,54(07):764-770. |
| [26] | Ibaraki Y;Sasaki T .[J].Journal of the Japan Institute of Metals,1979,43(09):845-851. |
| [27] | 陈付时.热机械加工对β钛合金硬度和显微结构的影响[J].钛合金信息,1994(06):6-7. |
| [28] | 韩明臣.钛合金的热氢处理[J].宇航材料工艺,1999(01):23-27. |
| [29] | 宫波,赖祖涵,新家光雄,小林俊郎.用热化学处理改善（α+β）型钛合金的组织和力学性能[J].中国有色金属学报,1994(03):86-89. |
| [30] | 丁桦;路贵民;张彩碚 等.氢处理对Ti3Al金属间化合物组织和性能的影响[J].材料科学与工艺,1998,6(04):55-58. |
| [31] | 张勇;张少卿;陶春虎 .氢化Ti-25A1-10Nb-3V-1Mo铸态合金的热压缩行为及其显微组织[J].金属学报,1996,32(03):235-238. |
| [32] | Senkov O N;Jonas J J .Effect of phase composition and hydrogen level on the deformation behavior of titanium-hydrogen alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1995,27:1869-1876. |
| [33] | Senkov O N;Dubois M;Jonas J J .Elastic moduli of titanium-hydrogen alloys in the temperature range 20 ℃ to 1 100℃[J].Metallurgical and Materials Transactions,1996,27A:3963-3966. |
| [34] | Brun M;Anoshkin N;Shakhanova G .Physical processes and regimes of thermomechanical processing controlling development of regulated structure in the α + β titanium alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1998,243:77-81. |
| [35] | 张朝生 .形变热处理对β型钛合金机械性能的影响[J].钢铁钒钛,2003,24(01):60-61. |
| [36] | 张旺峰,李兴无,马济民,曹春晓.钛合金强韧化新技术-BTMP工艺[J].轻金属,2005(01):39-41. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%