简介和探讨了盐雾试验技术的发展历史、盐雾腐蚀原理、盐雾试验参数及现行的主要试验标准.
参考文献
[1] | ASTM B117-1909.ASTM B117-1909.Standard Practice for Operating Salt Spray (Fog) Apparatus[S].,1909. |
[2] | ASTM B368-1909.ASTM B368-1909.Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)[S].,1909. |
[3] | ASTM G85-1909.ASTM G85-1909.Standard Practice for Modified Salt Spray (Fog) Testing[S].,1909. |
[4] | Timmins,F D .Avoiding Paint Failures by Prohesion[J].Journal of the Oil and Colour Chemists'Association,1979,62(04):131. |
[5] | Cremer,N D .Prohesion Compared to Salt Spray and Outdoors:Cyclic Methods of Accelerated Corrosion Testing,Federation of Societies for Coatings Techonology,1989 Paint Show[Z]. |
[6] | M.L Stephens.SAE ACAP Division 3 Profect:Evaluation of Corrosion Test Method:Paper No.892571[A].Warrendale,PA,1989:157-164. |
[7] | Introduction to Cyclic Corrosion Testing[Technical Bulletin LF-8144][R].Q-Panel |
[8] | ASTM D6899-1903.ASTM D6899-1903.Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel[S].,1903. |
[9] | 董言治,尉志苹,沈同圣,周晓东.高盐雾条件下舰船设备的腐蚀防护研究进展[J].现代涂料与涂装,2003(03):35-38. |
[10] | 张仁群,王斌,岳涛,赵晓林.浅析国军标GJB150与美军标MIL-STD-810F盐雾试验[J].环境技术,2008(05):42-45,26. |
[11] | 孙秋霞.材料腐蚀与防护[M].北京:冶金工业出版社,2003:41-54. |
[12] | Zeno W,威克斯;Frank N,琼斯;S Peter柏巴斯;经桴良,姜英涛.有机涂料科学和技术[M].北京:化学工业出版社:137-140. |
[13] | 王丽.盐雾试验参数确定的理论依据浅析[J].环境技术,1998(01) |
[14] | GB/T 10125-1997.GB/T 10125-1997.人造气氛腐蚀试验盐雾试验[S].北京:中国标准出版社,1997. |
[15] | GB/T 2423.17-2008.GB/T 2423.17-2008.电工电子产品基本试验第2部分试验方法试验ka:盐雾[S].北京:中国标准出版社,2008. |
[16] | GB/T 1771-2007.GB/T 1771-2007.色漆和清漆:耐中性盐雾性能的测定[S].北京:中国标准出版社,2008. |
[17] | ISO 9227-2006.ISO 9227-2006.Corrosion Tests in Artificial Atmospheres-Salt Spray Tests[S].,2006. |
[18] | IEC 60068-2-11-1981.IEC 60068-2-11-1981.Basic Environmental Testing Procedures:Part 2:Tests Test Ka:salt mist[S].,1981. |
[19] | GM 9540P-1997.GM 9540P-1997.Accelerate Corrosion Test[S].,1997. |
[20] | JIS Z2371-2000.JIS Z2371-2000.Methods of Salt Spray Testing[S].,2000. |
[21] | GB/T 1766-2008.GB/T 1766-2008.色漆和清漆:涂层老化的评级方法[S].北京:中国标准出版社,2008. |
[22] | ASTM D610-1907.ASTM D610-1907.Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces[S].,1907. |
[23] | ISO 10289-1999.ISO 10289-1999.Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates-Rating of test specimens and manufactured articles subjected to corrosion tests[S].,1999. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%