半固态加工技术的进展及我国应对措施

材料与冶金学报, 2002, 1(1): 15-19. doi: 10.3969/j.issn.1671-6620.2002.01.003

半固态加工技术的进展及我国应对措施

任栖锋 ^1, , 石路 ^2, , 路贵民 ^3, , 崔建忠 ^4,

1.东北大学,材料与冶金学院,辽宁,沈阳,110004

2.东北大学,材料与冶金学院,辽宁,沈阳,110004

3.东北大学,材料与冶金学院,辽宁,沈阳,110004

4.东北大学,材料与冶金学院,辽宁,沈阳,110004

基金项目: 国家自然科学基金(59974009)

关键词：半固态金属成形 , 制浆 , 数值模拟 , 应对措施

Progress and Countermeasure of Semi-Solid Metal Forming Technology

半固态金属成形技术具有高效、节能、近终形生产和成形件性能高等许多优点,被专家们称为21世纪最具前景的加工方法.本文介绍了半固态金属成形的成形工艺、坯料制备工艺、微观组织、数值模拟状况及国内外研究应用情况,展望了半固态金属的前景,提出了我国的应对措施.

参考文献

[1]	SPENCER D B;Flemings M C .Rheocasting[J].Materials Science and Engineering,1976,25:103-107.
[2]	Flemings M C .Behavior of alloys in the Semi-solid State[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1991,22(05):269-293.
[3]	谢水生;黄声宏.半固态加工金属加工技术及其应用[M].北京:冶金工业出版社,1999:12-16.
[4]	蒋鹏 .半固态金属成形技术的研究概况[J].塑性工程学报,1998,5(03):1-7.
[5]	罗守靖,田文彤,谢水生,毛卫民.半固态加工技术及应用[J].中国有色金属学报,2000(06):765.
[6]	Kirkwood D H .Semisolid metal processing[J].International Materials Reviews,1994,39(05):173-189.
[7]	Keneth P Young.[A].The University of Sheffield,1996:229-233.
[8]	Kattamis T Z .Reology of semi-solid Al-4 5%Cu-15%Mg alloys[J].Materials Science and Engineering,1991,131:265-272.
[9]	Flemings M C .Rheological behavior of Sn-15pct Pb in the crystallization range[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22(05):957-981.
[10]	唐靖林;曾大本 .半固态加工技术的发展和应用现状[J].兵器材料科学与工程,1998,21(03):56-60.
[11]	毛卫民.国外半固态成形技术应用和研究现状及我国的对策[A].北京,2000:12-21.
[12]	Hellawell A.Proceedings of the 4th international conference on semi-solid[A].The university of Sheffield,1996:60-65.
[13]	张景新,张奎,刘国钧,徐骏,石力开.电磁搅拌制备半固态材料非枝晶组织的形成机制[J].中国有色金属学报,2000(04):511.
[14]	朱鸣芳,苏华钦.半固态金属成形技术工业应用现状与展望[J].中国机械工程,1995(04):24.
[15]	郭钧,谢水生,黄声宏.半固态铝合金的制备工艺研究[J].稀有金属,1998(06):424-428.
[16]	Dantzig J A.[A].Denver C O,U S A,1998:241.
[17]	HirtG;Cremer R;Winkelmannetal.Proc 3th Int Conf on semisolid processing of alloys and compositions[C].Tokyo,Japan,1994:213.
[18]	Gibson R C;Kirkwood D H;Kapranos P.Proc 4th Int Conf on semisolid processing of alloys and compositions[C].The university of Sheffield,1996:136.
[19]	Kirkwooh D H.Proc 5th Int Conf On semisolid processing of alloys and compositions[C].Denver C O,U S A,1998:342.
[20]	Kapranos P;Gibson R C;Kirkwood D H.Rapid compression testing of semi-solid alloy slugs[J].Materials Science Forum,1999:525-530.
[21]	Kapranos P;Gibon R C;Kirkwood D H.Proc 4th Int Conf on semisolid processing of alloys and compositions[C].The university of Sheffield,1996:148.
[22]	Zavaliangos A;Lawley A .A Numerical simulation of thixoforming[J].Materials Engineering and Performance,1995,4(01):40.
[23]	Wang K K;Wang S P .Net inflow method for incompressible viscous flow with moving free surface[J].International Journal for Numerical Methods in Fluids,1994,18(07):669-694.
[24]	Karanos P;Kirkwood D H.Barkhudarov Proc 5th Int Conf On semisolid processing of alloys and compositions[C].Denver C O,U S A,1998
[25]	Barkhudarov M R;Bronisz C L;Hirt C W.Proc 4th Int Conf On semisolid processing of alloys and compositions[C].The university of Sheffield,1996
[26]	Tirms M L;Xu J;Dax F R.Proc 4th Int Conf On semisolid processing of alloys and compositions[C].The university of Sheffield,1996:120.
[27]	Kang C G;Kang D W.Proc 4th Int Conf On semisolid processing of alloys and compositions[C].The university of Sheffield,1996:142.
[28]	高志强;王云华;苏华钦.半固态合金触变铸造数值模拟方法的研究[J].特种铸造及有色合金,1997(08):6-8.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

半固态加工技术的进展及我国应对措施

Progress and Countermeasure of Semi-Solid Metal Forming Technology

参考文献