The bulk Fe60CoxZr10Mo5W2B23-x (x= 1, 3, 5, 7, 9) amorphous rods with diameters of1.5 mm were successfully prepared by copper mold casting method with the low purity raw materials.The amorphous and crystalline states, and thermal parameters, such as the glass transition temperature (Tg), the initial crystallization temperature (Tx), the supercooled liquid region (ΔTx = TxTg), the reduced glass transition temperature Trg (Tg/Tm, Tm: the onset temperature of melting of the alloy, and Tg/T1, T1 : the finished temperature of melting of the alloy) were investigated by X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) analysis. Glass forming ability of Fe60CoxZr10Mo5W2B23-x (x=1, 3, 5, 7, 9)bulk metallic glasses has been studied. According to the results, the alloy (x=7) with the highest Trg (Tg/T1 =0. 607, Tg/T1 =0.590) value, has the strongest glass forming ability among these alloys because its composition is near eutectic composition.The wide supercooled liquid region over 72 K indicates the high thermal stability for this alloy system.This bulk metallic glass exhibits quite high strength (Hv 1020). The success of production of the Febased bulk metallic glass with industrial materials is of great significance for the future progress of basic research and practical application.
参考文献
| [1] | Duwez P;Lin S C H .Amorphous ferromagnetic phase ironcarbon-phsophrous al loys[J].Journal of Applied Physics,1967,38:4096. |
| [2] | Inoue A;Gook J S .Effect of additional elements (M) on the thermal stability of supercooled liquid in Fe72-x Al5Ga2P11C6B4Mx glassy alloys[J].Materials Transactions,1996,37:32. |
| [3] | Inoue A;Zhang T;Takeuchi A .Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe-TM-B (TM=IV-VIII group transition metal) system[J].Applied physics letters,1997(4):464-466. |
| [4] | Zhang W;Inoue A .Formation and magnetic properties of bulk glassy Fe-Co-Nd-Dy-B alloys with high boron concentrations[J].Materials Transactions,2000,41:1679. |
| [5] | Pang S J;Zhang T;Asami K et al.Synthesis of Fe-Cr-MoC-B-P bulk metallic glasses with high corrosion resistance[J].Acta Materialia,2002,50:489. |
| [6] | Shen B L;Kimura H;Inoue A et al.Bulk glassy Fe-CoGa-P-C-B alloys with high glass-forming ability, high saturation magnetization and good soft magnetic properties[J].Materials Transactions,2000,41:1675. |
| [7] | Inoue A.;Mizushima T. .Bulk Amorphous Fe-Ga-P-B_C Alloys with a Large Supercooled Liquid Region[J].Materials transactions,2000(7):873-876. |
| [8] | Pang S J;Zhang T;Asami K.Bulk glassy Fe-Cr-MoB alloys with high corrosion resistance[A].New York:Consultants Bureau,1970:66-70. |
| [9] | Inoue A;Shen B L .Soft magnetic bulk glassy Fe-B-Si-Nb alloys with high saturation magnetization above 1.5 T[J].Materials Transactions,2002,43:766. |
| [10] | Inoue A;Shinohara Y;Gook J S .Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting[J].Materials Transactions,1995,36:1427. |
| [11] | Shen T D;Schwarz R B .Bulk ferromagnetic glasses prepared by flux and water quenching[J].Applied Physics Letters,1999,75:49. |
| [12] | Shen T D;Schwarz B R .Bulk ferromagnetic glasses in the Fe-Ni-P-B system[J].Acta Materialia,2001,49:837. |
| [13] | Inoue A;Takeuchi A;Zhang T .Ferromagnetic bulk amorphous alloys[J].Metallurgical and Materials Transactions,1998,29A:1779. |
| [14] | Greer A L .Confusion by design[J].NATURE,1993,336:303. |
| [15] | Boer F R;Perrifor D G.Cohesion in Metals[M].Netherlands: Elsevier Science publishers B V,1988 |
| [16] | Inoue A .Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta Materialia,2000,48:279. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%