采用CFD软件Fluent对漩流中间包内的流场进行了数值模拟,分析了漩流中间包内的流场特征,以及漩流室的加入,中间包内的流动形态.模拟结果表明,由于漩流室的加入使湍动能耗散主要集中在漩流室内部,有利于夹杂物的聚合长大;漩流室的加入可改善钢液的流动状态,利于夹杂物的上浮.由于入口位置的非对称布置,造成了漩流中间包内的流场在入口区呈明显的非对称分布,这些结果为进一步优化漩流中间包内漩流室的位置和中间包挡墙参数提供了理论依据.
参考文献
| [1] | Joo S;Han J w;Guthrie R I L .Inclusion behavior and heattransfer phenomena in steelmaking tundish operations.II:Mathematical-Model for Liquid Steel in Tundishes[J].METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY,1993,24:767-777. |
| [2] | Solorio-Diaz G;Morales R D;Ramos-Banderas A .Effect of a swirling ladle shroud on a fluid flow and mass transfer in a water model of a tundish[J].International Journal of Heat and Mass Transfer,2005,48:3574-3589. |
| [3] | Yuji M;Sigeru O;Tetsuya F .Separation of inclusions from molten steel in a mndish by use of a rotating electromagnetic field.Kawasaki Steel Technical Report[R].,1996. |
| [4] | Zou Z S;Hou Q F;Kuang S B.Feasibility stody ofa swirling flow tundish[A].Lulea,Sweden,2004:143-150. |
| [5] | 蒋国璋,孔建益,李公法,汪厚植,陶晓林,刘耀林.中间包流场的数值模拟及其优化[J].中国冶金,2008(02):46-50. |
| [6] | Kumar A;Koria SC;Mazumdar D .An assessment of fluid flow modelling and residence time distribution phenomena in steelmaking tundish systems[J].ISIJ International,2004(8):1334-1341. |
| [7] | Morales R D;Lopez-Ramirez S;Palafox-Kamos J et al.Numerical and modeling analysis of fluid flow and heat transfer of liquid steel in a jundish with different flow control devices[J].ISIJ Intemational,1999,39(05):455-462. |
| [8] | Chih-Ming FAN;Weng-Sing Hwang .Mathernadcal modeling of fluid flow phenomena during tundish filling and subsequent initial casting operation in steel continuous casting process[J].ISIJ International,2005,45(11):616-1625. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%