将W80Cu20(n(W):n(Cu)=4:1)混合粉末在QM-BP式行星式高能球磨机中球磨进行机械合金化,研究了不同球磨时间对W-Cu混合粉末组织的影响.采用XRD和SEM对不同球磨时间的粉末进行分析,结果显示随着球磨时间的增加,混合粉末产生合金化效果不断增强,Cu固溶于W中,并且晶粒尺寸得到一定的细化.
参考文献
| [1] | 陈伟,邝用庚,周武平.中国高温用钨铜复合材料的研究现状[J].稀有金属材料与工程,2004(01):11-14. |
| [2] | 范景莲,严德剑,黄伯云,刘军,汪澄龙.国内外钨铜复合材料的研究现状[J].粉末冶金工业,2003(02):9-14. |
| [3] | 吕大铭.钨铜复合材料研究的新进展[J].中国钨业,2000(06):27-31. |
| [4] | 刘兵发,谭敦强,周浪.纳米钨-铜复合材料制备工艺的研究[J].材料导报,2005(z2):180-183. |
| [5] | 范景莲,刘军,严德剑,黄伯云.细晶钨铜复合材料制备工艺的研究[J].粉末冶金技术,2004(02):83-86. |
| [6] | Raghu T.;Ramakrishnan P.;Mohan TRR.;Sundaresan R. .Synthesis of nanocrystalline copper-tungsten alloys by mechanical alloying[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):438-441. |
| [7] | 张全孝,高云,贾万明,陈继森.机械合金化铜-钨药型罩材料的研究[J].兵器材料科学与工程,2000(03):44-50. |
| [8] | Kim D G;Lee K W;Oh S T et al.The initial stage of sintering for the W-Cu nanocomposite powder prepared from W-CuO mixture[J].Materials Letters,2004,58(7-8):1199-1203. |
| [9] | Dae-Gun Kim;Baek-Hee Lee;Sung-Tag Oh;Young Do Kim;Sung-Goon Kang .Mechanochemical process for W-15 wt.%Cu nanocomposite powders with WO_3-CuO powder mixture and its sintering characteristics[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):333-337. |
| [10] | Dae-Gun Kim;Sung-Tag Oh;Hyeongtag Jeon .Hydrogen-reduction behavior and microstructural characteristics of WO_3-CuO powder mixtures with various milling time[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):239-242. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%