以不同粒径的石墨颗粒和SiC粉体为原料,采用SiC粉体包覆石墨颗粒的方法,于2 000 ℃热压制备了石墨/碳化硅(Gp/SiC)复合材料.利用扫描电子显微镜(SEM,EDS)分析了材料的金相和断口显微结构.研究表明,石墨粒径较小且质量分数较少的复合材料比石墨粒径较大且质量分数较多的复合材料在热压工艺中更致密.石墨颗粒呈岛状紧密地镶嵌在SiC基体中,石墨与SiC界面处C和Si的扩散不明显.复合材料的相对密度、抗折强度,断裂韧性和硬度随石墨粒径和质量分数的减少而增加.断口形貌表明SiC陶瓷基体为脆性,石墨为韧性断裂.当石墨粒径为125 μm、SiC与石墨的质量比为3.5时,复合材料的综合性能最佳,开口气孔率为0.3%,相对密度为97.9%,抗折强度为75±15 MPa,断裂韧性为5.4±0.5 MPa · m1/2,硬度为26.8±3GPa.
参考文献
| [1] | Katoh Y;Snead LL;Henager CH;Hasegawa A;Kohyama A;Riccardi B;Hegeman H .Current status and critical issues for development of SiC composites for fusion applications[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2007(a):659-671. |
| [2] | S. Fouquet;M. Rollin;R. Pailler;X. Bourrat .Tribological behaviour of composites made of carbon fibres and ceramic matrix in the Si-C system[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(9/10):850-856. |
| [3] | Jiping Wang;Min Lin;Zhuo Xu .Microstructure and mechanical properties of C/C-SiC composites fabricated by a rapid processing method[J].Journal of the European Ceramic Society,2009(14):3091-3097. |
| [4] | Lemarchand A;Bonnet J P .Modelling silicon carbide formation during heating at constant rate[J].Journal of the European Ceramic Society,2006,26(12):2389-2396. |
| [5] | Zhen Wang;Shaoming Dong;Ping He .Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler[J].Journal of the European Ceramic Society,2010(3):787-792. |
| [6] | 何柏林,孙佳.碳纤维增强陶瓷基复合材料界面的研究进展[J].材料导报,2009(21):72-75. |
| [7] | Yanzhi Cai;Shangwu Fan;Heyi Liu;Litong Zhang;Laifei Cheng;Juan Jiang;Benxing Dong .Mechanical properties of a 3D needled C/SiC composite with graphite filler[J].Materials Science & Engineering. A, Structural Materials: Properties, Misrostructure and Processing,2010(3):539-543. |
| [8] | R. Gadiou;S. Serverin;P. Gibot .The synthesis of SiC and TiC protective coatings for carbon fibers by the reactive replica process[J].Journal of the European Ceramic Society,2008(11):2265-2274. |
| [9] | Yu L;Zhao J;Yue XY et al.Microstructure and properties of graphite embedded SiC composite by coating method[J].Current Advances in Materials and Processes,2010,105-106:855-858. |
| [10] | 王延斌;苏勋家;候根良 等.碳纤维增韧陶瓷基复合材料界面的研究[J].材料导报,2007,21(z3):431-433. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%