以COREX实际尺寸和操作参数为基础,假设回旋区内只有气、固两相,根据相似准则建立了COREX熔化气化炉模型用以研究回旋区.实验采用聚乙烯粒子作为模型的填充物料,并用红色粒子作为示踪粒子,研究了回旋区的形成过程;通过颗粒速度场确定的回旋区边界,分析了风速、排料速度(焦炭燃烧速度)、料层高度等因素对回旋区大小的影响.
参考文献
| [1] | Nomura S I .A simple treatment on the geometry of raceway zone[J].Transactions of the Iron and Steel Institute of Japan,1986,26:107-113. |
| [2] | 张生富,温良英,白晨光,欧阳奇,禹爱民.基于数字图像处理的高炉风口回旋区的监测[J].钢铁研究学报,2006(03):56-59. |
| [3] | Blast Furnace Phenomena and Modelling[M].Elsevier Applied Science Publishers LTD,1987 |
| [4] | 成兰伯;曾向明 .高炉风口回旋区工作状况的初步研究[J].钢铁,1982,17(11):54-64. |
| [5] | Sabita SARKAR;Govind Sharan GUPTA;Shin-ya KITAMURA .Prediction of Raceway Shape and Size[J].ISIJ International,2007(12):1738-1744. |
| [6] | Huang D (Frank);Tian Fengguo;Chen Nianwen.A comprehensive simulation of the raceway formation and combustions[A].,2009:333-344. |
| [7] | Hatano M;Fukuda M;Takeuchi M .An experimental study of the formation of raceway using a cold model[J].Tetsu To Hagane-Journal of the Iron and Steel Institute of Japan,1976,1:25-32. |
| [8] | Kuwabara M;Muchi I.Theoretical analysis of blast furnace operation based on the gas flow through layered ore and coke burdens[A].,1975:61-67. |
| [9] | Nakamura M;Sugiyama T;Uno T et al.Configulation of the raceway in the experimental furnace[J].Tetsu To Hagane-Journal of the Iron and Steel Institute of Japan,1977,63(01):28-36. |
| [10] | Takahashi F;Komatsu N .Cold model study on burden behaviour in the lower part of blast furnace[J].ISIJ International,1993,33(06):655-663. |
| [11] | H.Takahashi .Burden Descending Behaviour with Renewal of Deadman in a Two Dimensional Cold Model of Blast Furnace[J].ISIJ International,1996(11):1354-1359. |
| [12] | 罗志国,孙野,刘洪华,邹宗树.利用颗粒速度标量场确定风口回旋区边界[J].过程工程学报,2009(02):228-232. |
| [13] | G. S. GUPTA;V. RUDOLPH .Comparison of Blast Furnace Raceway Size with Theory[J].ISIJ International,2006(2):195-201. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%