为了选择正确的微观溶质偏析模型研究铁碳合金的凝固过程,利用Thermo-Calc商业软件计算了不同碳含量下铁碳合金的固相线温度、液相线温度和碳的平衡分配系数,利用数值方法研究了不同微观溶质偏析模型下铁碳合金的固液界面温度和无量纲液相溶质浓度.数值结果表明:文献中常用的碳平衡分配系数不准确;Clyne-Kurz模型和Scheil模型不能准确地预测固液界面温度,Brody-Flemings模型不能正确地预测碳偏析,建议采用杠杆模型和大中逸雄模型计算铁碳合金凝固过程的微观溶质偏析.
参考文献
| [1] | Clyne T W;Kurz W .Solute redistribution during solidification with rapid solid state diffusion[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1981,12(03):965-971. |
| [2] | Doru M. STEFANESCU .Methodologies for Modeling of Solidification Microstructure and Their Capabilities[J].ISIJ International,1995(6):637-650. |
| [3] | Wang C Y;Beckermann C .A unified solute diffusion model for columnar and equiaxed dendritic alloy solidification[J].Materials Science and Engineering,1993,A171(1-2):199-211. |
| [4] | Qing Chen;Bo Sundman .Computation of Partial Equilibrium Solidification with Complete Interstitial and Negligible Substitutional Solute Back Diffusion[J].Materials transactions,2002(3):551-559. |
| [5] | Ohnaka I .Mathematical analysis of solute redistribution during solidification with diffusion in solid phase[J].Transactions of the Iron and Steel Institute of Japan,1986,26(12):1045-1051. |
| [6] | 徐达鸣,傅恒志,郭景杰,贾钧,李庆春.一种合金枝晶凝固微观溶质再分布统一模型[J].哈尔滨工业大学学报,2003(10):1156-1161. |
| [7] | M. REZA ABOUTALEBI;M. HASAN;R.I.L. GUTHRIE .Coupled Turbulent Flow, Heat, and Solute Transport in Continuous Casting Processes[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,1995(4):731-744. |
| [8] | 张红伟,王恩刚,赫冀成.方坯连铸过程中钢液流动、凝固及溶质分布的耦合数值模拟[J].金属学报,2002(01):99-104. |
| [9] | 李中原,赵九洲.平行板型薄板坯连铸结晶器中钢液流动、凝固及溶质分布的三维耦合数值模拟[J].金属学报,2006(02):211-217. |
| [10] | Hong LEI;Dian-Qiao GENG;Ji-Cheng HE .A Continuum Model of Solidification and Inclusion Collision-growth in the Slab Continuous Casting Caster[J].ISIJ International,2009(10):1575-1582. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%