材料期刊网

H ＋扩散系数是酸岩反应模型计算的关键参数，分析判断酸岩反应过程中 H ＋扩散系数规律，有助于优化酸压工艺设计方案，提高改造效果。通过引入幂律流体雷诺数与施密特数，修正了不同黏度酸液酸岩反应动力学参数测定装置的 H ＋扩散系数计算方法。结合在不同酸液浓度、反应温度和流速条件下的酸岩反应实验，获得了稠化酸和交联酸的酸岩反应速率及 H ＋扩散系数相关规律。结果表明：酸液浓度、反应温度和流速增大时，酸岩反应速率均加快，酸液黏度升高会导致各因素对酸岩反应的影响程度降低。酸液浓度为0．006 mol／cm3，离子间的牵制作用导致 H ＋扩散系数最小。酸液流动过程存在边界层效应，当稠化酸和交联酸流速分别超过113．21 cm／s 和158．38 cm／s 时，H ＋扩散系数趋于稳定。

The diffusion coefficient of H + is the key parameter which is used to calculate the acid reaction model.To analyses the law of the hydrogen ions diffusion coefficient in acid reaction helps to optimize acid fracturing technology design and to improve to the stimulation effect. Through introducing the power law fluid Reynolds number and the Schmidt number,the authors correct the calculation method of the hydrogen ion diffusion coefficient in the different viscosity acid reaction kinetics parameter measurement apparatus.Combining the theoretical formula and the acid rock reaction experiment,they obtain the laws of the acid rock reaction rate and H + diffusion coefficient of the gelled acid and the in-situ gelled acid.They make the acid rock reaction experiment by changing acid concentration,reaction temperature and flow velocity.The results show that when the acid concentration,reaction temperature and velocity increase,the rate of acid reaction increases.The increase of the acid viscosity can reduce the degree of various factors influencing the acid reaction. When the acid concentration is 0.006 mol/cm3 ,the H + diffusion coefficient is minimal.The reason is
that the H + is trapped in the solution by the holding each other between the ions.The H + diffusion coefficient increases as the acid flow velocity increases.When the gelled acid flow velocity is faster than 113.21 cm/s (in-situ gelled acid is 158.38 cm/s),the growing hydrogen ion diffusion coefficient tends to be stable.