综合评述了国内外温压技术的研究进展,并对其致密化机制进行了探讨.在此基础上,对今后的研究方向提出了几点建议.
参考文献
| [1] | 亓家钟 .Ancodense温压工艺[J].粉末冶金工业,1995,5(01):14-16. |
| [2] | 韩凤麟 .ANCORDENSETM温压工艺特性[J].粉末冶金技术,1995,13(04):294-302. |
| [3] | Owens Bob .Ancordense offers high density at low cost[J].Me tal Powder Report,1994,49(06):2. |
| [4] | Capus J et al.Hoeganaes offers higher density at lower cost[J].Metal Powder Report,1994,49(7/8):22-24. |
| [5] | Rutz H G et al.Warm compaction offers high density at low cos t[J].Metal Powder Report,1994,49(09):40-47. |
| [6] | Howard G. Rutz;Francis G. Hanejko .HIGH DENSITY PROCESSING OF HIGH PERFORMANCE FERROUS MATERIALS[J].International Journal of Powder Metallurgy,1995(1):9,11-17-0. |
| [7] | Technology trends in near net shape manufacturing[J].Advanced Materials & Processes,1998(1):47-50. |
| [8] | QMP looks at high density products[J].Metal Powder Report,1994,49(7/8):23. |
| [9] | Oliver et al.Method of making an iron/polymer powder composit ion[P].U S patent:No 5321060,1994. |
| [10] | Luk et al.Metal powder compositions containing binding agents for eleva ted temperature compaction[P].U S patent:No 5429792,1995. |
| [11] | Luk et al.Iron-based powder compositions containing green strength enh ancing lubricants[P].U S patent:No 5624631,1997. |
| [12] | St-Laurent S;Chagnon F;言小雄 .为温压工艺设计的混合粉[J].粉末冶金技术,1998,16(01):40-51. |
| [13] | Anon .Warm compaction moves into production[J].Metal Powder Report,1996,51(7/8):38. |
| [14] | Engstrm U;et al;亓家钟 .温压粉末冶金材料的性能与公差[J].粉末冶金工业,1997,7(02):10-15. |
| [15] | Storstrom et al.Metal powder composition for warm compaction and method for producing sintered products[P].U S patent:No 5744433,1998. |
| [16] | Warm compaction attracts scientific interest[J].Metal Powder Report,1996,51(10):12. |
| [17] | C. N. Degoix. A. Griffo;R. M. German .Effect of lubrication mode and compaction temperature on the properties of Fe-Ni-Cu-Mo-C[J].International Journal of Powder Metallurgy,1998(2):29-33. |
| [18] | 果世驹 等.粉末烧结钢温压粘结剂玻璃化温度调整的预测方程[J].粉末冶金技术,1997,15(02):85-88. |
| [19] | 果世驹 等.无粘结剂铁粉的温压工艺研究[J].粉末冶金工业,1996,6(06):5-9. |
| [20] | 张双益,肖志瑜,冼志勇,李元元.SiC颗粒增强铁基粉末冶金复合材料的研究[J].华南理工大学学报,1999(05):105. |
| [21] | 果世驹;林涛 .温压压制压力强化因子及压制曲线的唯象分析[J].粉末冶金技术,1998,16(03):165-168. |
| [22] | 黄培云.粉末冶金原理[M].北京:冶金工业出版社,1982 |
| [23] | 黄培云;金展鹏;陈振华.粉末冶金基础理论与新技术[M].长沙:中南工业大学出版社,1995 |
| [24] | X.-K. Sun;K.-T. Kim .Simulation of cold die compaction densification behaviour of iron and copper powders by Cam-clay model[J].Powder Metallurgy,1997(3):193-195. |
| [25] | Shigeyuki Tamura et al.Steel Powder Compaction and Forming Analysis[J ][J].International Journal of Powder Metallurgy,1998,34(01):50-59. |
| [26] | 茹铮.塑性加工摩擦学[M].北京:科学出版社,1992 |
| [27] | 石淼霖.固体润滑技术[M].北京:中国石化出版社,1998 |
| [28] | Semd F J et al.Method for preparing binder-treated metallurgical powde rs containing an organic lubricant[P].U S patent:No 5256185,1993. |
| [29] | Press makers signal faith in warm-compaction[J].Metal Powder Report,1994,49(7/8):24. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%