本文对平面流铸工艺快速凝固过程的数值模拟研究现状作了介绍.主要内容包括:(1)对溶潭的形成及特征、平面流铸工艺参数对条带形成及质量的影响的数值模拟(2)结合快速凝固过程的形核和晶体生长的动力学特征对平面流铸凝固过程的数值模拟(3)平面流铸过程界面传热系数的数值模拟.文章最后,提出了平面流铸工艺快速凝固数值模拟研究的进一步发展方向.
参考文献
| [1] | 李月珠.快速凝固技术和材料[M].北京:国防工业出版社,1993 |
| [2] | 向青青;李荣德;周彼德.平面流铸技术的数值模拟与试验研究进展[J].铸造,1999(02):46-49. |
| [3] | R E Maringer.Solidification on a Substrate[J].Materials Science and Engineering,1988(98):13-16. |
| [4] | M. Yan;W. Z. Zhu;B. Cantor .The microstructure of as-melt spun Al-7%Si-0.3%Mg alloy and its variation in continuous heat treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):77-83. |
| [5] | P Cremerand;T Bigot.An Infrared Thermograph Study of the Temperature Variation of an Amorphous Ribbon during Production by PFC[J].Materials Science and Engineering A,1988(98):227-236. |
| [6] | H Yu.A fluid mechanics model of the planar flow melt spinning process under low Reynolds number conditions[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1987(18):557-563. |
| [7] | E M Gutierrez;J Szekely.A Mathematical Model of the Planar Flow Melt Spinning Process[J].Metallurgical and Materials Transactions,1986(17B):695-703. |
| [8] | S A Berger;D K Al.A Simple Fluid Mechanical Model for Planar Flow casting Melt-Spinning[J].Metallurgical and Materials Transactions,1988(19B):695-703. |
| [9] | K Takeshita;P H Shingu.An Analysis of the Ribbon Formation Process by the Single Roller Rapid Solidification Technique[J].Transactions of the Japan Institute of Metals,1983(24):529-536. |
| [10] | L Granasy.Analysis of the Ribbon Formation Process on the Single Roller Rapid Solidification Technique[J].Transactions of the Japan Institute of Metals,1986(27):51-60. |
| [11] | L Granasy;Gy Meszaros.Models for Continuous Casting of Metallic Glass Ribbons I:The Applicability of the infinite-viscosity Assumption ot Thermal History Calculations[J].Materials Science and Engineering,1988(72):71-83. |
| [12] | K Takeshita;P H Shingu.An Analysis of the Melt Puddle Formation in the Single Roller Chill Block Casting[J].Transactions of the Japan Institute of Metals,1983(27):141-148. |
| [13] | Z Sun;Davies H A.Computer Modeling of Ribbon Formation in the Melt Spinning of Crystalline Metals[J].Materials Science and Engineering,1988(98):71-74. |
| [14] | A Poopisut .Fluid Mechanics and Heat Transfer in Chill Block Melt Spinning and Planar Flow Casting[D].Ph.D. Thesis State University of New York at Bullalo,1988. |
| [15] | Z Gong;P Wilde;E F Matthys.Numerical Modeling of the Planar Flow Melt-Spinning Process and Experimental Investigation of its Solidification Puddle Dynamics[J].International Journal of Rapid Solidification,1991(06):1-28. |
| [16] | G X Wang;E F Matthys.Modeling of Rapid Solidification by melt-Spinning: Effect of Heat Transfer in the Cooling Substrate[J].Materials Science and Engineering A,1991(136):85-97. |
| [17] | G X Wang;E F Matthys.Modeling of Heat Transfer and Solidification during Splat Cooling: Effect of Splat Thickness and Splat/Substrate Thermal Contact[J].Int J Rapid Sodi,1991(06):141-174. |
| [18] | G X Wang;E F Matthys.Numerical Modeling of Phase Change and Heat Transfer during Rapid Solidification Process: Use Control Volume Intergrals with Element Subdivision[J].International Journal of Heat and Mass Transfer,1992(35):141-153. |
| [19] | L Kubicar;S Adamisova.Theoretical Analysis of Ribbon Formation by Planar Flow Casting[J].International Journal of Rapid Solidification,1995(08):281-313. |
| [20] | H.Fujino;T.Suzuki .A Numerical Model for Cooling Rate Dependence of the Degree of Undercooling during Rapid Solidification of 18Cr-8Ni Stainless Steel[J].ISIJ International,1997(11):1107-1111. |
| [21] | K Takeshita;P H Shingu.An Analysis of the Heat Transfer Problem with Phase Transformation during Rapid Quenching[J].Transactions of the Japan Institute of Metals,1983(24):293-300. |
| [22] | Andress Ludwig.Georg Fmmmeyer and Laszlo Granasy Modeling of Crystal Growth during the Ribbon Formation in Planar Flow Casting[J].Stell research,1990(61):467-471. |
| [23] | G X Wang;V Prasad;E F Matthys.An Interfacetracking Numerical Method for Rapid Planar Solidificaion of Binary Alloys with Application to Microsegregation[J].Materials Science and Engineering,1997(A225):47-58. |
| [24] | T W Clyne.Numerical Treatment of Rapid Solidification[J].Metallurgical and Materials Transactions,1984(15b):369-381. |
| [25] | X Zang;A Atrens.A Thermokinetic Model for Rapid Solidification[J].International Journal of Rapid Solidification,1992(07):83-107. |
| [26] | X Zang;A Atrens.The Effect of Thermophysical Properties on the Rapid Solidification Characteristics of Different Materials According to a Thermokinetic Model[J].International Journal of Rapid Solidification,1993(08):1-19. |
| [27] | Kyong-Yee Lee;Chun P.Hong Stochastic Modeling of Solidification Grain Structures of A1-Cu Crystalline Ribbons in Planar Flow Casting[J].ISIJ International,1997(37):38-46. |
| [28] | 巴发海 .快速凝固Ni-Al合金的相组成和凝固动力学研究[D].北京科技大学,2001. |
| [29] | H Hillmann;H R Hilzinger.Rapid Quenched Metals Ⅲ[J].The Metallurgical Society,1978(22) |
| [30] | P H Shingu;K Kobayashi;R Suzuki;K Takeshita.Rapid Quenched Metals IV[J].The Japan Institute of Metals,1982(57) |
| [31] | 胡汉起;沈宁福;姚山;王自东.金属凝固原理[M].北京:机械工业出版社,2000 |
| [32] | H A Davies;N Shohoji;D H Warrington.Rapid Solidification processing Ⅱ[M].claitor's pub. div,1980 |
| [33] | K Takeshita;Shingu P H.Thermal Contact during the Cooling by the Single Roller Chill block Casting[J].Transactions Jap lust Met,1986(27):454-462. |
| [34] | D Kashchiev.[J].Surface Science,1969(14):209. |
| [35] | G Shao;P Tsakiropoulos.Prediction of phase select in rapid solidification using time dependent nucleation theory[J].Acta Metallurgica et Materialia,1994(42):2937-2942. |
| [36] | W J Boettinger;S R Coriell;R Trivedi.in Rapid Solidification processing:Principle and Technology Ⅳ[M].Claitor' s Publishing division baton Rouge LA,1988:13-15. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%