欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 中国材料进展
  4. 原位反应制备颗粒增强钛基复合材料的研究进展

中国材料进展, 2006, 25(5): 1-8. doi: 10.3969/j.issn.1674-3962.2006.05.001

原位反应制备颗粒增强钛基复合材料的研究进展

王朋波 1, , 毛小南 2, , 杨冠军 3, , 赵永庆 4, , 张鹏省 5, , 于兰兰 6,

1.西安建筑科技大学,陕西,西安,710055;西北有色金属研究院,陕西,西安,710016

2.西北有色金属研究院,陕西,西安,710016

3.西北有色金属研究院,陕西,西安,710016

4.西北有色金属研究院,陕西,西安,710016

5.西北有色金属研究院,陕西,西安,710016

6.西北有色金属研究院,陕西,西安,710016

关键词： 钛基体 , 复合材料 , 颗粒增强 , 原位反应合成

Progress in Research on in Situ Synthesis Particulate Reinforced Titanium Matrix Composites

原位反应制备的颗粒增强钛基复合材料中增强颗粒与基体的相容性好,复合材料高温性能稳定,成为制备高性能颗粒增强钛基复合材料的首选途径.目前,粉末冶金法、熔铸法、放热弥散法、燃烧合成法和机械合金化法都已用于原位反应制备颗粒增强钛基复合材料.综述了这些制备方法的原理、特点以及制备出的复合材料的组织和性能,指出了原位反应制备颗粒增强钛基复合材料今后的发展方向.

参考文献

[1] 曾泉浦;王彰默;毛小南 et al.颗粒增强钛基复合材料的研究[J].稀有金属材料与工程,1991,20(06):524-530.
[2] 罗国珍.钛基复合材料的研究与发展[J].稀有金属材料与工程,1997(02):1-7.
[3] 毛小南.颗粒增强钛基复合材料在汽车工业上的应用[J].钛工业进展,2000(02):5-12.
[4] 李程.生物植入钛复合材料的合成[J].稀有金属快报,2005(01):39-40.
[5] 朱纪磊.外科植入用耐磨钛基陶瓷复合材料[J].稀有金属快报,2005(06):40.
[6] Fan Z;Niu H J;Miodownik A P .Microstructure and Mechanical Properties of In-Situ Ti/Tib Mmcs Produced by a Blended Elemental Power Me tallurgy Method[J].Key Engineering Materials,1997,127-131:423-430.
[7] H. T. Tsang;C. G. Chao;C. Y. Ma .Effects of volume fraction of reinforcement on tensile and creep properties of in-situ TiB/Ti MMC[J].Scripta materialia,1997(9):1359-1365.
[8] M. L. Van Meter;S. L. Kampe;L. Christodoulou .Mechanical properties of near-γ titanium aluminides reinforced with high volume percentages of TiB_2[J].Scripta materialia,1996(8):1251-1256.
[9] Subrahmanyam J;Vijayakumar M .Review:Self-Propagating High-Temperature Synthesis[J].Journal of Materials Science,1992,27(23):6249-6273.
[10] Goodwin P S;Ward-close C M .Mechanical Alloying of Titanium Based Materials[J].Materials Science Forum,1997,235:53-58.
[11] Clyne T W;Flower H M.Titanium Matrix Composites [A].California:TMS,1992:2467-2468.
[12] 吕维洁;张小农;张荻 et al.原位合成TiC/Ti基复合材料增强体的生长机制[J].金属学报,1999,35(05):536-540.
[13] 吕维洁,张小农,张荻,吴人洁,卞玉君,方平伟.原位合成TiB/Ti基复合材料增强体的生长机制[J].金属学报,2000(01):104-108.
[14] Ranganth S;Subrahmanyam J .On the In-Situ Formation of TiC and Ti2C Reinforcement in Combustion Assisted Synthesis of Titanium Matrix Composites[J].Metallurgical and Materials Transactions,1996,27(A):237-240.
[15] Bhat BVR.;Subramanyam J.;Prasad VVB. .Preparation of Ti-TiB-TiC & Ti-TiB composites by in-situ reaction hot pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):126-130.
[16] 罗楷;李棣泉;梁振锋 et al.粉末冶金元素混合法反应生成颗粒增强钛基复合材料[J].金属学报,1999,35(z1):359-362.
[17] Turkdogan E T;魏季和;傅杰.高温工艺物理化学[M].北京:冶金工业出版社,1980
[18] 曾立英.燃烧合成加烧结法制备钛基复合材料[J].稀有金属快报,2004(02):38-39.
[19] Kobayashi M.;Suzuki S.;Ouchi C.;Funami K. .Manufacturing process and mechanical properties of fine TiB dispersed Ti-6Al-4V alloy composites obtained by reaction sintering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):279-284.
[20] （W,Ti）C增强Ni-Ti基复合材料的制备[J].稀有金属快报,2003(09):21-22.
[21] Ma Z.Y.;Tjong S.C. .IN-SITU Ti-TiB METAL-MATRIX COMPOSITE PREPARED BY A REACTIVE PRESSING PROCESS[J].Scripta materialia,2000(4):367-373.
[22] Dodfrey T M T;Wisbey A .Microstructure and Tensile Properties of Mechanically Alloyed Ti-6Al-4V with Boron Addition[J].Materials Science and Engineering,2000,A282:240-250.
[23] 张荻;吕维洁;覃继宁 et al.原位自生TiB和TiC增强钛基复合材料研究[J].稀有金属材料与工程,2005,34(z3):125-129.
[24] Hyman M E;Mccullough C;Valencia J J et al.Microstructure Evolution in TiAl Alloys with B Addition:Conventional Solidification[J].Metallurgical and Materials Transactions,1989,20A(07):1847-1859.
[25] Rawers J C;Wrzesinki W R;Roub E K et al.T iAl-SiC Composites Prepared by High Temperature Synthesis [J].Materials Science and Technology,1990,6(02):187-191.
[26] Kobashi M;Kanetake N.Innovative Processing of Porous Ti Composites by Combustion Reaction[A].Hamburg:WILEY-VCH,2003:2511-2516.
[27] Ranganath S .A Review on Particulate-Reinforced Titanium Matrix Composites[J].Journal of Materials Science,1997,32(01):1-16.
[28] Rangarajan S;Aswath P B;Soboyejo W O .Microstructure Development and Fracture of in Situ Reinforced Ti-8.5Al1B-1Si [J].Scripta Materialia,1997,35(02):239-245.
[29] W. TONG;G. RAVICHANDRAN;T. CHRISTMAN;T. VREELAND Jr .PROCESSING SiC-PARTICULATE REINFORCED TITANIUM-BASED METAL MATRIX COMPOSITES BY SHOCK WAVE CONSOLIDATION[J].Acta Metallurgica et Materialia,1995(1):235-250.
[30] Banerjee R;Collins P C;Genc A.Direct Lser Deposition of In-Situ Metal Matrix Composites Based on Titanium Borides[A].Hamburg:WILEY-VCH,2003:2547-2554.
[31] Feng Haibo;Jia Dechang;Zhou Yu .Spark Plasma Sintering Recation Synthesized TiB Reinforced Titanium Matrix Composites[J].Composites,2005,36:558-563.
[32] 吴全兴.TiB/Ti复合材在反应烧结中TiB粒子的生成行为[J].稀有金属快报,2004(01):41.
[33] Lin Y;Zee R H;Chin A .In-Situ Formation of Three-Dimensional TiC Reinforcements in Ti-TiC Composites[J].Metallurgical and Materials Transactions,1991,22A(04):859-865.
[34] Konitzer D G;Loreto M H .Microstructural Assessment of Ti6Al4V-TiC Metal-Matrix Composite[J].Acta Metallurgy,1989,37(02):397-401.
[35] Kamp S L.Creep Deformation of TiB2-Reinforced Near-Titanium Aluminides[J].Metallurgical Transactions,1991:22,447-45.
[36] Dartigues F;Payan S;Garica M.Microstructures of In-Situ Ti/TiB Composites Produced by a Liquid Manufacturing Route [A].Hamburg:WILEY-VCH,2003:2495-2501.
[37] Kumar K S;whittenberger J D.Discontinuously Reinforced Intermetall Matrix Composites via Xd Synthesis[J].Materials Science and Technology,1992(08):317-329.
[38] Furuta T;Yamaguchi T;Saito T.P/M Titanium Metal Matrix Composite.For Exhaust Value[A].Saint-Peterburg:CRISM,1999:1917-1924.
[39] Dubey S;Lederich R J;Soboyejo W O .Fatigue and Fracture of Damage Tolerant In-Situ Titanium Matrix Composites[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1997,28:1997-2037.
[40] Godfrey T M T;Goodwin P S;Ward-close CM.A Review of Recent Progress in the Production Andmechanical Properties of Particulate Titanium Metal Matrix Composites [A].Saint-Peterburg:WILEY-VCH,1999:1868-1877.
[41] 毛小南,张鹏省,于兰兰,袁少冲,赵永庆.纤维增强钛基复合材料研究新进展[J].稀有金属快报,2005(05):1-7.
[42] Geng Ke;Lu Weijie;Zhang Di et al.Tensile Properties of in Situ Synthesized Titanium Matrix Composites Reinforced by TiB and Nd2O3 at Elevated Temperature[J].Materials & Design,2003,24:409-414.
[43] Dasilva A A M;Dossantos J F;Strohaecker T R.Properties of Diffusion Bonded TiC Particulate Reinforced Ti-6Al-4V Metal Matrix Composite [A].Hamburg:WILEY-VCH,2003:2539-2546.
[44] 袁武华,吉喆,张召春,杨寿智.钛基复合材料及其制备技术研究进展[J].材料导报,2005(04):54-57.
[45] Sweety Kumari;Prasad N;eswara;Ravichandran K S et al.H igh-Temperature Deformation Behavior of Ti-TiBw in Situ Metal-Matrix Compoaites[J].Proquest Science Journals,2004,56(05):51-54.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net