欢迎登录材料期刊网

材料期刊网

高级检索

通过工业试验研究120 t顶底复吹转炉双渣法脱磷一次倒渣时的供氧制度、枪位控制和一次倒渣条件对脱磷的影响.结果表明最佳的一次倒渣工艺条件为:一倒吹氧时间和吹氧量应分别控制在390~ 420 s和2 300~2400 m3;-倒温度、碱度、FeO以及P2O5含量分别控制为1 400~1 420℃、≥2.06、≥10.97%和2.54% ~ 3.0%时,可以实现一倒钢液磷含量最低为0.032%,脱磷率最高为75.57%.

参考文献

[1] YANG Xiao;SUN Feng-mei;YANG Jin-li;LIU Fei;CHENG Kui-sheng;WANG Jian-hua.Optimization of Low Phosphorus Steel Production With Double Slag Process in BOF[J].钢铁研究学报(英文版),2013(08):41-47.
[2] Emi, Toshihiko.Steelmaking Technology for the Last 100 Years: Toward Highly Efficient Mass Production Systems for High Quality Steels[J].ISIJ International,20151(1):36-66.
[3] I. K. Ibraev;O. T. Ibraeva.Problems of Dephosphorization during Steelmaking[J].Russian Metallurgy(Metally),20136(6):435-437.
[4] 万雪峰;曹东;李德刚;廖相巍;王丽娟;常桂华.鞍钢转炉双渣深脱磷工艺研究与实践[J].钢铁,2012(6):32-36.
[5] 方宇荣;黄标彩;赖兆奕;陈伯瑜;曾兴富.复吹转炉单炉新双渣法脱磷工艺研究与应用[J].炼钢,2014(3):1-4.
[6] K. Naito;S. Kitamura;Y. Ogawa.Effects of BOF top blowing and bottom stirring conditions on suppressing excessive oxidation[J].Ironmaking & Steelmaking: Products and applications,20023(3):209-214.
[7] 周朝刚;李晶;武贺;蔡可森;吴国平;曹余良.转炉双渣脱磷一次倒渣温度研究[J].钢铁,2014(3):24-28,35.
[8] Zhou, Xiaobin;Ersson, Mikael;Zhong, Liangcai;Jonsson, Par.Optimization of Combined Blown Converter Process[J].ISIJ International,201410(10):2255-2262.
[9] TIAN Zhi-hong;LI Ben-hai;ZHANG Xiao-ming;JIANG Zhong-hang.Double Slag Operation Dephosphorization in BOF for Producing Low Phosphorus Steel[J].钢铁研究学报(英文版),2009(03):6-14.
[10] Zhou Wang;Feiming Xie;Bin Wang.The Control and Prediction of End-Point Phosphorus Content during BOF Steelmaking Process[J].Steel Research International,20144(4):599-606.
[11] S.-Y. Kitamura;K. Yonezawa;Y. Ogawa.Improvement of reaction efficiency in hot metal dephosphorisation[J].Ironmaking & Steelmaking: Products and applications,20022(2):121-124.
[12] Yasushi OGASAWARA;Yuji MIKI;Yuichi UCHIDA.Development of High Efficiency Dephosphorization System in Decarburization Converter Utilizing Fe_tO Dynamic Control[J].ISIJ International,201310(10):1786-1793.
[13] CHRISTOPHER P. MANNING;RICHARD J. FRUEHAN.The Rate of the Phosphorous Reaction Between Liquid Iron and Slag[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,20131(1):37-44.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%