以机械合金化法制备金属表面功能涂层这一新型工艺为主要实验背景,通过有限元数值模拟研究在球磨制备涂层的过程中,涂层与基体的界面形貌形成及演变过程,讨论不同工艺参数对界面形貌的影响,进而分析球磨的工艺参数对涂层的制备效果、涂层与基体结合性能的影响.研究不同的球磨参数下,基体材料的残余应力分布和等效塑性应变分布,分析其对基体材料力学性能的影响,并且对该力学响应过程中的热效应进行了数值分析.
参考文献
| [1] | C. Suryanarayana .Mechanical alloying and milling[J].Progress in materials science,2001(1/2):1-184. |
| [2] | Romankov, S.;Hayasaka, Y.;Shchetinin, I.V.;Kasai, E.;Komarov, S.V.;Yoon, J.-M. .Investigation of structural formation of Al-SiC surface composite under ball collisions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(9):3455-3462. |
| [3] | Zadorozhnyy V;Kaloshkin S;Kaevitser E et al.Coating of metals with intermetallics by mechanical alloying[J].Journal of Alloys and Compounds,2011,509:S507-S509. |
| [4] | S. Romankov;S.V. Komarov;E. Vdovichenko .Fabrication of TiN coatings using mechanical milling techniques[J].International Journal of Refractory Metals & Hard Materials,2009(2):492-497. |
| [5] | A. Revesz;L. Takacs .Coating metals by surface mechanical attrition treatment[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):111-114. |
| [6] | Revesz, A;Takacs, L .Coating a Cu plate with a Zr-Ti powder mixture using surface mechanical attrition treatment[J].Surface & Coatings Technology,2009(20/21):3026-3031. |
| [7] | 黄真,沈以赴,朱永兵,顾冬冬.低碳钢表面Cr合金层的低温高能球磨制备[J].兵器材料科学与工程,2008(02):54-57. |
| [8] | Dongdong Gu;Yifu Shen .Microstructures and properties of high Cr content coatings on inner surfaces of carbon steel tubular components prepared by a novel mechanical alloying method[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(1):223. |
| [9] | 孙斌斌,李玉芳,顾冬冬.机械球磨法制备TiC/Al复合涂层的显微组织及力学性能[J].兵器材料科学与工程,2010(01):81-84. |
| [10] | Chattopadhyay PP.;Talapatra S.;Pabi SK.;Manna I. .A mathematical analysis of milling mechanics in a planetary ball mill[J].Materials Chemistry and Physics,2001(1/3):85-94. |
| [11] | Meyers M A.Dynamic behavior of materials[M].Wiley-Inter-science,1994:299-300. |
| [12] | Meyer H W .Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration[J].International Journal of Impact Engineering,2001,26(1/10):509-521. |
| [13] | K. Dai;L.Shaw .Comparison between shot peening and surface nanocrystallization and hardening processes[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):46-53. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%