The microstructure and hardness of a 2024 aluminum alloy subjected to multi-pass upsetting extrusion at ambient temperature were studied. Experimental results indicated that with the number of upsetting extrusion passes increasing, the grains of the alloy are gradually refined and the hardness increases correspondingly. After ten passes of upsetting extrusion processing, the grain size decreases to less than 200 nm in diameter and the sample maintains its original shape, while the hardness is double owing to equal-axial ultrafine grains and work hardening effect caused by large plastic deformation.
参考文献
| [1] | Brittain C P;Armstrong R.W;Smith GC .Hall-petch dependence for ultrafine grain size electrodeposited chromium[J].Scripta Metallurgica et Materialia,1985,19(01):89. |
| [2] | Liu EX;Yuan W.M;Tang X .Relationship between grain size and mechanical properties for fine grain K418 alloy[J].材料工程,1996,9:25. |
| [3] | Lu W L;Wang Y;Feng Z.Z;Hai J.T .Production of the ultrafine-grained materials by sandglass extrusion process[J].Hot Working Technology(in Chinese),2001,2:10. |
| [4] | Markushev M V;Bampton C.C;Murashkin M.Y;Hardwick D.A .Structure and properties of ultra-fine grained aluminum alloys produced by severe plastic deformation[J].Materials Science and Engineering A,1997,234(30):927. |
| [5] | 李小强,胡连喜,王尔德,贺文雄,刘祖岩.Microstructure of TiAl alloy prepared by intense plastic deformation and subsequent reaction sintering[J].中国有色金属学会会刊(英文版),2002(04):621-624. |
| [6] | Belyakov A.;Sakai T. .SUBSTRUCTURES AND INTERNAL STRESSES DEVELOPED UNDER WARM SEVERE DEFORMATION OF AUSTENITIC STAINLESS STEEL[J].Scripta materialia,2000(4):319-325. |
| [7] | F. John Humphreys;Philip B. Prangnell;Ronald Priestner .Fine-grained alloys by thermomechanical processing[J].Current opinion in solid state & materials science,2001(1):15-21. |
| [8] | Wang ZC.;Prangnell PB. .Microstructure refinement and mechanical properties of severely deformed Al-Mg-Li alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):87-97. |
| [9] | Furukawa M.;Horita Z.;Nemoto M.;Langdon TG. .The use of severe plastic deformation for microstructural control[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1-2 Special Issue SI):82-89. |
| [10] | Valiev R Z;Kozlov E.V;Ivanov Y.F .Deformation behaviour of ultra-fine-grained copper[J].Acta Metallurgica Et Materialia,1994,42(07):2467. |
| [11] | Furukawa M;Iwahashi Y;Horita Z;Nemoto M.,Tsenev N.,Valiey R.,Langdon T .Structural evolution and the Hall-Petch relationship in an AI-Mg-Li-Zr alloy with ultra-fine grain size[J].Acta Materialia,1997,45(01):4751. |
| [12] | Mabuchi M.;Iwasaki H.;Higashi K.;Ameyama K. .Low temperature superplasticity of AZ91 magnesium alloy with non-equilibrium grain boundaries[J].Acta materialia,1999(7):2047-2057. |
| [13] | W.J. Kim;J.K. Kim;W.Y. Choo .Large strain hardening in Ti--V carbon steel processed by equal channel angular pressing[J].Materials Letters,2001(2):177-182. |
| [14] | Iwahashi Y;Horita Z;Nemoto M .Factors influencing the equilibrium grain size in equalchannel angular pressing: Role of Mg additions to aluminum[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(10):2503. |
| [15] | J. R. Bowen;A. Gholinia;S. M. Roberts;P. B. Prangnell .Analysis of the billet deformation behaviour in equal channel angular extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):87-99. |
| [16] | Zasadzinski J;Richert J;Libura W .Structure and properties of P/M materials formed in a new method without sintering[J].Advances in Powder Metallurgy,1992,4(06):353. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%