借助OM、SEM、TEM和XRD等手段研究了Al0.3Mn0.4Fe铝合金铸轧板坯的晶粒组织和析出相大小、形貌和分布情况.研究表明:铸轧板坯的晶粒不是等轴晶粒,而是沿轧向的纤维晶粒;析出相主要呈枝晶状、骨骼状、针状和网状,其边角较尖锐.经EDS、XRD和单晶电子衍射分析,枝晶和骨骼状等粗大析出相主要是Al6(FeMn).
参考文献
| [1] | 蒋显全,李宁,张秀锦,江茂华.3102合金翅片铝箔铸轧过程的晶粒变化与控制[J].特种铸造及有色合金,2006(07):454-456. |
| [2] | 蒋显全,李宁,何健,何洪,张秀锦,李纯迟,阳浩.退火工艺对薄壁Al-Mn-Fe-Si翅片铝箔力学性能和组织的影响[J].金属热处理,2006(03):48-51. |
| [3] | 蒋显全,李宁,张秀锦,张伟,何健,何洪,李纯迟.Al-Mn-Fe-Si亲水箔的高温拉伸变形研究[J].功能材料,2006(08):1295-1297,1302. |
| [4] | 王祝堂;田荣章.铝合金及其加工手册[M].长沙:中南工业大学出版社,1989 |
| [5] | LIU Yi-Lin;Delaey L Aemoudt et al.Substructure development and mechaniccal properties in cold-rolled aluminium alloy 3004 Ⅰ:Substructure development[J].Materials Science and Engineering,1987,96(12):125-137. |
| [6] | 陈永禄,傅高升,陈文哲.均匀化退火对Al-1Mn-1Mg合金中析出相形态的影响[J].材料热处理学报,2006(01):40-44. |
| [7] | Liu Y L;Kang S B;Kim H W .The complex microstructures in an as-cast AlMgSi alloys[J].Materials Letters,1999,41:267-272. |
| [8] | Cai M;Field D P;Lorimer G W .A systematic comparision of static and dynamic aging of two Al-Mg-Si alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,373:65-71. |
| [9] | Totik Y;Sadeler R;Kaymaz I et al.The effect of homgenisation on cold deformations of AA2014 and AA6063 alloys[J].Journal of Materials Processing Technology,2004,147:60-64. |
| [10] | 均匀化处理对3004铝合金显微组织的影响[J].中国有色金属学报,1999(03):556. |
| [11] | Porter D A;Easterling K E.Phase Transformations in Metals and Alloys[M].New York:Van Nostrand Reinhold Company Inc,1981:62-69. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%