欢迎登录材料期刊网

材料期刊网

高级检索

为研究添加Ni元素对Al-10Si-15Cu合金钎料耐腐蚀性能的影响,本文采用三电极方法测量了Al-10Si-15Cu和Al-10Si-15Cu-4Ni合金钎料在0.5 M NaCl盐溶液中的动电位极化曲线和交流阻抗谱,并利用XRD、SEM和EDS等技术分析腐蚀前后的表面成分和形貌.结果表明,Al-10Si-15Cu-4Ni合金中主要含有α-Al、Si相、Al2 Cu相及Al3 (Cu,Ni)2相.在Al-10Si-15Cu钎料合金的基础上添加4 wt.%Ni后,自腐蚀电流密度icorr从10.18μA cm-2降低到3.42 μA cm-2,极化电阻RP提高近3倍,合金耐腐蚀性提高,而临界点蚀电位EPit4Ni负移,△E(=EPit-Ecorr)变小,点蚀倾向加剧.Al-10Si-15Cu-4Ni合金钎料中部分Cu元素固溶在粗大耐腐蚀相Al3 Ni2中,抑制了腐蚀相Al2 Cu相的生成;同时由于Ni的添加耐腐蚀块状Si相转变为片状结构,Al2 Cu相聚集,从而增大了基体α-Al的相对面积,这两个方面均有利于钎料合金的耐腐蚀性的提高.

参考文献

[1] 丁向群,何国求,陈成澍,刘小山,朱正宇.6000系汽车车用铝合金的研究应用进展[J].材料科学与工程学报,2005(02):302-305.
[2] Miller W S,Zhuang L,Bottema J,et al .Recent development in aluminium alloys for the automotive industry[J].Materials Science and Engineering:A,2000,280(1):37~49.,2000.
[3] 陈忠伟,介万奇.Mg含量对Al-Si-Mg铸造合金微观组织与力学性能的影响[J].材料科学与工程学报,2004(05):647-652.
[4] 王少刚,刘红霞.SiC颗粒增强铝基复合材料的钎焊性[J].材料科学与工程学报,2009(02):186-189,265.
[5] 郦剑,罗娟,罗来马,俞佳,朱流.硬质合金与钢基体钎焊技术的研究进展[J].材料科学与工程学报,2009(06):955-958.
[6] Spigarelli S,Evangelista E,McQueen H J .Study of hot workability of a heat treated AA6082 aluminum alloy[J].ScriptaMaterialia,2003,49(2):179~183.,2003.
[7] McQueen H J,Xia X,Cui Y,et al .Solution and precipitation effects on hot workability of 6201 alloy[J].Materials Science and Engineering:A,2001,319
[8] Tsao L C,Tsai T C,Wu C S,et al .Brazeability of the 6061-T6 aluminum alloy with Al-Si-20Cu-based filler metals[J].Journal of materials engineering and performance,2001,10(6):705~709.,2001.
[9] Chuang T H,Tsao L C,Tsai T C,et al .Development of a lowmelting-point filler metal for brazing aluminum alloys[J].Metallurgical and Materials Transactions A,2000,31(9):2239~2245.,2000.
[10] 蒋会荣,路文江,俞伟元,陈学定,宋翀(日).快速凝固Al-Cu-Si薄带的脆性研究[J].材料科学与工程学报,2003(05):679-682.
[11] Chang S Y,Tsao L C,Li T Y,et al .Joining 6061 aluminum alloy with Al-Si-Cu filler metals[J].Journal of Alloys and Compounds,2009,488(1):174~180.,2009.
[12] Wei Dai,Song-bai Xue,Feng Ji,Jiang Lou,Bo Sun,Shui-qing Wang.Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing Sr[J].矿物冶金与材料学报,2013(04):365-370.
[13] Chuang T H,Tsao L C,Tsai T C,et al .Development of a lowmelting-point filler metal for brazing aluminum alloys[J].Metallurgical and Materials Transactions A,2000,31
[14] Tsao L C,Chiang M J,Lin W H,et al .Effects of zinc additions on the microstructure and melting temperatures of Al-Si-Cu filler metals[J].Materials Characterization,2002,48(4):341~346.,2002.
[15] Wang S S,Cheng M D,Tsao L C,et al .Corrosion behavior of Al-Si-Cu-(Sn,Zn) brazing filler metals[J].Materials characterization,2001,47(5):401~409.,2001.
[16] Su T L,Wang S S,Tsao L C,et al .Corrosion behaviors of Al-Si-Cu-based filler metals and 6061-T6brazements[J].Journal of materials engineering and performance,2002,11(2):187~193.,2002.
[17] Jacobson D M,Humpston G,Sangha S P S .A new lowmelting-point aluminum braze[J].Welding Journal-Including Welding Research Supplement,1996,75(8):243~250.,1996.
[18] Humpston G,Sangha S P S,Jacobson D M .New filler metals and process for fluxless brazing of aluminium engineering alloys[J].Materials science and technology,1995(11):1161~1168.,1995.
[19] Stem M,Geary A L .Electrochemical polarization I.A theoretical analysis of the shape of polarization curves[J].Journal of the electrochemical society,1957,104(1):56~63.,1957.
[20] Cheng Y L,Zhang Z,Cao F H,et al .Study of the potential electrochemical noise during corrosion process of aluminum alloys 2024,7075 and pure aluminum[J].Materials and Corrosion,2003,54(8):601~608.,2003.
[21] Szklarska-Smialowska Z.Pitting corrosion of metals[M].National Association of Corrosion Engineers,1986.,1986.
[22] 单毅敏,罗兵辉,柏振海.5083铝合金在3.5%NaCl溶液中的电化学腐蚀行为研究[J].铝加工,2007(01):11-14.
[23] O'Grady W E,Ramaker D E .AtomicX-ray absorption fine structure:a new tool for examining electrochemical interfaces[J].Electrochimicaacta,1998,44(8):1283~1287.,1998.
[24] Sun Y S,Lorimer G W,Ridley N .Microstructure and its development in Cu-Al-Ni alloys[J].Metallurgical Transactions A,1990,21(2):575~588.,1990.
[25] Hilpert K,Kobertz D,Venugopa V,et al .Phase Diagram Studies on the Al-Ni System[J].Z.Naturforsch,1987,42
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%