回转水纺丝工艺可以把熔融金属直接纺成圆截面的细丝,具有许多传统拉丝工艺所不具备的优点.对纺丝过程中射流运动和凝固的相关工艺问题进行了总结,并对其研究与应用现状进行了评述.
参考文献
| [1] | Ohnaka I et al.Production of metal filament by in-rotatingwater spinning method[J].Japanese Journal of Metal,1981,45:751. |
| [2] | 德拉津P G;雷德W H.流体动力稳定性[M].北京:宇航出版社,1990:19. |
| [3] | Heyder B;Frommeyer G .Direct casting of continuous fi bres and wires by in-rotating-liquid spinning[J].Materials Science,1991,133:667. |
| [4] | McCarthy M J;Molloy N A .Review of stability of liquid jets and the influence of nozzle design[J].Chemical Engineering Journal,1974,7:1. |
| [5] | Frommeyer G;Heyder B .Continuouis casting of thin wires and fibres by in-rotationg-liquid spinning[J].Materials Science,1993,173:327. |
| [6] | 张远君.流体力学大全[M].北京:北京航空航天大学出版社,1992:205. |
| [7] | Abe Y et al.The behavior of metal jet in the in-rotating water spinning method[J].Transactions of the Iron and Steel Institute of Japan,1987,27:929. |
| [8] | Ono Y et al.Production process of grain orientation-controlled Fe-6.5mass% Si alloy fiber using spinning in gas atmosphere followed by winding in rotating liquid[J].Journal of Alloys and Compounds,1999,289:277. |
| [9] | Bijaoui D et al.[P].US:5000251,1991-03-19. |
| [10] | Shimaoka M;Ohnaka I .Analysis of solidification of molten metal jet in the in-rotating-water spinning process[J].MATERIALS TRANSACTIONS,1991,32(04):368. |
| [11] | 赵汝溥;管国锋.化工原理[M].北京:化学工业出版社,1999:158. |
| [12] | Ono Y et al.Spinning phenomena,structure and magnetic properties of Fe-6.5mass% Si alloy fiber produced by the in-rotating-liquid-spinning process[J].Journal of Alloys and Compounds,1999,289:220. |
| [13] | Ueno S et al.Optimum chemical composition for high strength in Fe-Ni-Cr-Si-C wires produced by melt spinning into rotating water[J].Materials Science,1994,181/182:1340. |
| [14] | Inoue A et al.Microstructure and mechanical properties of rapidly quenched L12 alloys in Ni-Al-X systems[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14:1367. |
| [15] | Bijaoui D et al.[P].US:5477910,1995-10-26. |
| [16] | 胡赓样;蔡珣.材料科学基础[M].上海:上海交通大学出版社,2000:342. |
| [17] | Barariu F;Vinai F;Murgulescu I;Ferrara E;Chiriac H .Structural and magnetic properties of (Fe sub 100- x Co sub x ) sub 73.5 Cu sub 1 Nb sub 3 Si sub 13.5 B sub 9 nanocrystalline wires[J].Nanostructured Materials,1999(5/8):1011-1014. |
| [18] | Ogasawara I.;Ueno S. .Preparation and properties of amorphous wires[J].IEEE Transactions on Magnetics,1995(2):1219-1223. |
| [19] | Ercuta A et al.Magneto-mechanical effect in circular fieldin Fe77.5Si7.5B15 amorphous wire[J].Journal of Optoelectronics and Advanced Materials,2002,4(02):361. |
| [20] | Montero O et al.Temperature effect on the MI ratio ofCo68.15Fe4.35Si12.5B15 amorphous wires[J].Journal of Magn Magn,2005,290-291:1075. |
| [21] | Chizhik A et al.Investigation of magnetic structure in cold-drawn Fe-rich amorphous wire[J].Journal of Magn Magn,2004,279:359. |
| [22] | Vazquez M. .Soft magnetic wires[J].Physica, B. Condensed Matter,2001(3/4):302-313. |
| [23] | Ochin P et al.Preparation and characterization of Cu-based shape-memory thin wires obtained by in rotating water meltspinning[J].Materials Science Forum,2002,394-395:503. |
| [24] | Dezellus A et al.Shape memory properties of Cu-based thin wires obtained by the in rotating water spinning technique[J].Journal of Physics,2003,112I:567. |
| [25] | Tsubata H et al.[P].US:4617983,1986-10-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%