首先采用固相反应法分别合成了Mg2TiO4和CaTiO3粉体,然后在其混合物(质量比0.95:0.05)加入质量分数为1.5%的CuO作为烧结助剂进行微波烧结;用排水法、阻抗分析、XRD、SEM等方法对烧结体的密度、电容及介电损耗、晶相组成、微观形貌进行了分析.结果表明:微波烧结明显缩短了烧结周期,并且烧结体的烧结性能和介电性能良好,在1 310℃保温45 min获得烧结体的介电性能优异,在10 kHz下介电常数为19.19,介电损耗为0.002 2;烧结体主晶相为MgzTiO4,次晶相为CaTiO3,同时含有少量的MgTiO3,微波烧结材料中的次晶相发育不完整.
参考文献
[1] | Whittaker, AG .Diffusion in microwave-heated ceramics[J].Chemistry of Materials,2005(13):3426-3432. |
[2] | I.-Nan Lin;Wan-Chu Lee;Kuo-Shung Liu .On the microwave sintering technology for improving the properties of semiconducting electronic ceramics[J].Journal of the European Ceramic Society,2001(10/11):2085-2088. |
[3] | Z.Xie and Y.huang .Microwave processing and properties of ceramics with different dielectric loss[J].Journal of the European Ceramic Society,1999(3):381-387. |
[4] | P. D. Ramesh;D. Brandon;L. Schdchter .Use of partially oxidized SiC particle bed for microwave sintering of low loss ceramics[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):211-220. |
[5] | S. Mahboob;A.B. Dutta;C. Prakash .Dielectric behaviour of microwave sintered rare-earth doped BaTiO_3 ceramics[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2006(1):36-40. |
[6] | 杨文,常爱民,庄建文,杨邦朝.Ba0.65Sr0.35TiO3陶瓷材料的制备及介电特性研究[J].无机材料学报,2002(04):822-826. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%