应用光学显微镜和电子探针分析方法，对70钢连铸坯中非金属夹杂物的形貌、大小、数量、组成和来源进行了研究，旨在降低钢中非金属夹杂物的含量，提高钢材质量。结果表明，铸坯中5μm以上的夹杂物主要为形状不规则的脱硫产物Ⅲ型硫化锰，其次为复合脱氧产物铝硅酸盐和凝固前沿形成的铁氧化物，以及少量脱氧产物与熔蚀耐火材料形成的球状铝酸盐或含镁铝硅酸盐，研究结果为优化70钢连铸坯生产工艺提供了依据。
The amount, size, morphology, composition and source of the inclusion in 70 continuous casting billet werestudied by means oI optical microscopy and electron probe mlcroanalysis （EPMA） to lower the amount ot non-metal inclusion and to increase the quality of steel. The results show that the III-MnS in irregular shape is main inclusions larger than5 μm in continuous casting billet, then the composite aluminates by deoxidizing products and the FeO precipitated inthe front of steel solidification, and a few globular compound aluminates reacted with refractory MgO or A12 03.The study could be useful to optimize the produetion technology of 70 continuous casting billet.
参考文献
| [1] | 王海涛,许中波,靳庆峰,唐恩,王彦锋.72A冶炼过程中洁净度的研究[J].钢铁研究,2003(05):10-12. |
| [2] | 杨晓江,徐志荣,王新华.低碳铝镇静钢洁净度及非金属夹杂物的研究[J].钢铁研究,2008(02):14-18. |
| [3] | 薛正良,李正邦,张家雯.钢的纯净度的评价方法[J].钢铁研究学报,2003(01):62-66. |
| [4] | 王硕明,吕庆,王洪利,梁玫.转炉流程轴承钢连铸坯非金属夹杂物的行为[J].东北大学学报（自然科学版）,2006(02):192-195. |
| [5] | 李桂军,魏军,蔡开科,周英超,吕建权.CSP连铸薄板坯中非金属夹杂物行为研究[J].钢铁,2006(07):37-40. |
| [6] | 兰岳光,邹宗树,姜茂发,姚永宽,胡道峰,马军.连铸小方坯夹杂物来源与控制[J].钢铁,2003(12):23-25. |
| [7] | 吴雨晨,李俊国,闫小林,李守章,曾亚南.X70管线钢铸坯中非金属夹杂物的研究[J].钢铁钒钛,2009(03):44-49. |
| [8] | 尹安远;吴素君 .钢中非金属夹杂的鉴定[J].理化检验,2007,43(08):395. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%