欢迎登录材料期刊网

材料期刊网

高级检索

研究了Fe78Si9B13非晶合金磁芯进行环氧封装及封装后对非晶合金磁芯软磁性能的影响。结果表明对磁芯进行环氧封装,有效改善磁芯的机械强度同时,能改善带材表面的平整度,在带材表面形成一层绝缘层,显著降低了非晶合金磁芯高频下的损耗值,封装后的非晶合金磁芯在Bm=1T,f=1kHz下,损耗值比封装前下降了14%。综合考虑机械强度大小、磁化难易、损耗高低等因素,封装胶浓度为2%时封装效果最佳。

The coating with epoxy onFe78Si9B13 amorphous alloy magnetic core and its influence on soft magnetic properties were studied. It is found that the core~s mechanical strength and the strip's flatness are improved after coating. At the same time, a insulation layer of coating can be formed on the surface of the strip. The coatings play significant roles in decreasing the core loss of amorphous alloy magnetic cores at high frequencies. Af- ter coating, the core loss of amorphous alloy magnetic cores decreased by 14% at Bm=1T, f=lkHz. Considering the factor such as mechanical strength, magnetization, and core loss, the coating achieves best as the ratio of coating adhesive is 2 %.

参考文献

[1] Willard MA.;Mchenry ME.;Thoma D.;Sickafus K.;Cross JO. Harris VG.;Laughlin DE. .Structure and magnetic properties of (Fe0.5Co0.5)(88)Zr7B4Cu1 nanocrystalline alloys[J].Journal of Applied Physics,1998(12):6773-6777.
[2] 夏小鸽,朱正吼,马广斌.退火工艺对FeCuNbSiB非晶带材压磁效应的影响[J].功能材料,2006(12):1881-1883.
[3] 马广斌,朱正吼,夏小鸽,李塘华.非晶Fe94Si6薄带压磁效应的研究[J].功能材料,2007(01):14-15,19.
[4] 马广斌,朱正吼,夏小鸽.退火条件对FeCuNbSiB非晶带材应力阻抗效应的影响[J].热加工工艺,2006(20):1-3.
[5] Yoshizawa Y;Oguma S;Yamauchi K .[J].Journal of Applied Physics,1988,64(10):6044-6046.
[6] 朱正吼,宋晖,严明明,李长全,徐玉华.FeCuNbSiB非晶软磁带材的制备及其缺陷分析[J].机械工程材料,2004(10):48-50.
[7] 夏小鸽,朱正吼,马广斌.基于磁芯的环氧树脂基封装材料研究[J].功能材料,2008(01):36-37,40.
[8] 黄伟兵,朱正吼,杨操兵,刘志宾,付远.Fe/FeSiB磁粉芯软磁性能研究[J].功能材料,2010(11):2010-2013.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%