研究了带NiCrAlY,TiAlCr及搪瓷涂层的TiAlNb合金分别在800℃和900℃时的氧化行为.结果表明,3种涂层均能在一定程度上对基体合金提供防护,但氧化后,涂层和合金间出现了不同程度的反应和互扩散.氧化时,NiCrAlY涂层发生内氧化,且在NiCrAlY/TiAlNb界面互扩散严重,而界面的某些区域形成的保护性Al2O3虽能有效阻碍氧的内扩散,但也导致涂层从基体表面剥落;TiAlCr涂层表面形成连续Al2O3能对基体提供很好的防护,但涂层/合金界面出现的Nb和Cr的互扩散带可能会影响涂层寿命及基体合金的力学性能.在与TiAl合金接触时,搪瓷变得不稳定,氧化过程中,涂层与合金界面形成一定厚度的反应层,致使涂层与合金间结合力下降.
参考文献
[1] | Tang Z;Shemet V;Niewolak L;Singheiser L Quadakkers W J .[J].Intermetallics,2003,11:1. |
[2] | Roy T K;Balasubramaniam R;Ghosh A .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27:3993. |
[3] | Varma S K;Chan A et al.[J].Oxidation of Metals,2001,55:423. |
[4] | Shida Y;Anada H .[J].Oxidation of Metals,1996,45:197. |
[5] | Quadakkers W J;Zheng N;Wallura E .[J].Werkstoffe und Korrosion,1997,48(01):28. |
[6] | Perez P;Haanappel V A C;Stroosnijder M F .[J].Materials Science and Engineering A,2000,284:126. |
[7] | Roy T K;Balasubramaniam R;Ghosh A .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27:4003. |
[8] | Li XY.;Ma BK.;Zhang YG.;Chen CQ.;Zhang TH. .Influence of post-implantation annealing on the oxidation behavior of Nb implanted gamma-TiAl based alloy[J].Nuclear Instruments and Methods in Physics Research, Section B. Beam Interactions with Materials and Atoms,2000(0):37-42. |
[9] | Yoshihara M;Miura K .[J].Intermetallics,1995,3(05):357. |
[10] | Chen G;Sun Z;Zhou X .[J].Materials Science and Engineering A,1992,153:597. |
[11] | Chen G;Sun Z;Zhou X .[J].Corrosion,1992,48:939. |
[12] | Taniguchi S .[J].Materials and Corrosion,1997,48:1. |
[13] | Tang Z;Wang F;Wu W .[J].Materials Science and Engineering A,2000,276:70. |
[14] | Niewolak L;Shemet V;Gil A;Singheiser L Quadakkers W J .[J].Advances in Engineering Materials,2001,3:496. |
[15] | Tang Z.;Niewolak L.;Shemet V.;Singheiser L.;Quadakkers WJ.;Wang F. Wu W.;Gil A. .Development of oxidation resistant coatings for gamma-TiAl based alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):297-301. |
[16] | Xiong Y;Zhu S;Wang F .[J].Surface and Coatings Technology,2005,190:195. |
[17] | Fang W.;Ko SH.;Hashimoto H.;Abe T.;Park YH. .High temperature oxidation behavior of Ti3Al-Nb alloys prepared by pulse discharge sintering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):708-712. |
[18] | 邵规贤.搪瓷学[M].北京:中国轻工业出版社,1983 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%