本文基于电容层析成像方法对气固流化床干燥、混合过程进行测量分析,研究循环流化床干燥过程固体颗粒浓度分布、湿度等主要参数随时间的变化规律.其中电容传感器包括8电极圆形传感器,用于流化床颗粒包衣过程浓度分布测量,12-4组合电极用于环核区域颗粒浓度分布测量,基于电容层析测量手段,对制药行业与流化反应有关的过程进行了系统研究,对典型过程进行了优化分析和控制.
参考文献
| [1] | Richard Turton .Challenges in the modeling and prediction of coating of pharmaceutical dosage forms[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2008(2):186-194. |
| [2] | Hampel, N.;Bück, A.;Peglow, M.;Tsotsas, E..Continuous pellet coating in a Wurster fluidized bed process[J].Chemical Engineering Science,2013:87-98. |
| [3] | Haigang Wang;Wuqiang Yang .Scale-up of an electrical capacitance tomography sensor for imaging pharmaceutical fluidized beds and validation by computational fluid dynamics[J].Measurement Science & Technology,2011(10):104015-1-104015-11. |
| [4] | Wang HG;Dyakowski T;Senior P;Raghavan RS;Yang WQ .Modelling of batch fluidised bed drying of pharmaceutical granules[J].Chemical Engineering Science,2007(5):1524-1535. |
| [5] | H. G. Wang;W. Q. Yang;P.Senior .Investigation of Batch Fluidized-Bed Drying by Mathematical Modeling, CFD Simulation and ECT Measurement[J].AIChE Journal,2008(1):427-444. |
| [6] | H.G. Wang;W.Q, Yang .Measurement of fluidised bed dryer by different frequency and different normalisation methods with electrical capacitance tomography[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2010(1):60-69. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%