Layer manufacture technologies are gaining increasing attention in the manufacturing for the production of polymer mould tooling. Layer manufacture techniques can be used in this potential manufacturing area to produce tooling either indirectly or directly, and powder metal based layer manufacture systems are considered as an effective way of producing rapid tooling. Mechanical properties and accuracy are critical for tooling. This paper reports the results of an experimental study examining the potential of layer manufacturing processes to deliver production tooling for polymer manufacture. A comparison between indirectly selective laser sintering and directly selective laser sintering to provide the tooling was reported. Three main areas were addressed during the study: mechanical strength, accuracy, and build rate. Overviews of the results from the studies were presented.
参考文献
| [1] | C S Edson;S Masanari;O Kozo;L Tahar .[J].International Journal of Machine Tools and Manufacture,2006,46:1459. |
| [2] | J.H. Liu;Y.S. Shi;Z.L. Lu;Y. Xu;K.H. Chen;S.H. Huang .Manufacturing metal parts via indirect SLS of composite elemental powders[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):146-152. |
| [3] | H. Asgharzadeh;A. Simchi .Effect of sintering atmosphere and carbon content on the densification and microstructure of laser-sintered M2 high-speed steel powder[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):290-298. |
| [4] | L Hongjun;F Zitian;H Naiyu;D Xuanpu .[J].Journal of Materials Processing Technology,2003,142(03):710. |
| [5] | E Berry;J M Brown;M Connell;C M Craven N D Efford A Radjenovic and M A Smith .[J].Medical Engineering and Physics,1997,19(01):90. |
| [6] | J. P. Kruth;L. Froyen;J. Van Vaerenbergh .Selective laser melting of iron-based powder[J].Journal of Materials Processing Technology,2004(1/3):616-622. |
| [7] | L Lu;J Y H Fuh;Y S Wong.Laser-Induced Materials and Processes for Rapid Prototyping[M].Kluwer Academic Publishers,Norwell,USA,2001 |
| [8] | M Dewidar;K W Dalgaxno;C S Wright.Advances in Manufacturing Technology XV[M].John Wiley and Sons,Inc,2001:181. |
| [9] | A. Simchi .Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):148-158. |
| [10] | S. Kumar;J.-P. Kruth .Effect of bronze Infiltration into laser sintered metallic parts[J].Materials & Design,2007(1):400-407. |
| [11] | A. Simchi;F. Petzoldt;H. Pohl .On the development of direct metal laser sintering for rapid tooling[J].Journal of Materials Processing Technology,2003(3):319-328. |
| [12] | D. King;T. Tansey .Rapid tooling: selective laser sintering injection tooling[J].Journal of Materials Processing Technology,2003(1/3):42-48. |
| [13] | D Gu;Y Shen .[J].Materials Letters,2006,60(29):3664. |
| [14] | D. Gu;Y. Shen .Effects of dispersion technique and component ratio on densification and microstructure of multi-component Cu-based metal powder in direct laser sintering[J].Journal of Materials Processing Technology,2007(26):564-573. |
| [15] | J.W. Xie;P. Fox;W. O'Neill .Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels[J].Journal of Materials Processing Technology,2005(3):516-523. |
| [16] | DTM .Guide to materials:rapidSteelTM 2.0 used to produce rapid tool LR mold inserts[Z].DTM Corporation,DCN:8002-10001,1998. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%