TiB2材料作为一种新型先进材料,由于具有强度高、硬度高、耐磨损、耐腐蚀、熔点高、蒸气压低、导电性良好等优点而被广泛研究.介绍了TiB2材料的晶体结构与性质及其制备方法,包括直接合成法、碳热法、镁热法、溶胶-凝胶法、化学气相沉积法等,并分析总结了TiB2材料的致密化、涂层、复相陶瓷、微纳米结构等应用研究热点.其中,将两种或多种方法结合起来制备TiB2,已成为降低成本、减少污染、优化性能的重要途径.
参考文献
[1] | Welham .Mechanical enhancement of the carbothermic formation of TiB2[J].Metallurgical and Materials Transactions,2000,31(01):283. |
[2] | Merzhanov;Borovinskaya .Self-propagating high-temperature synthesis of refractory inorganic compounds[J].Doklady Akademii Nauk SSSR,1972,204(02):366. |
[3] | 长崎诚三;平林真.二元合金状态图集[M].北京:冶金工业出版社,2004:158. |
[4] | 向新 等.TiB2及其复合材料研究进展[J].陶瓷学报,1999,20(02):112. |
[5] | 马爱琼,王臻.硼化钛及其单相陶瓷的制备[J].陶瓷,2005(05):10-14. |
[6] | Navneet Kumar;Yu Yang;Wontae Noh .Titanium Diboride Thin Films by Low-Temperature Chemical Vapor Deposition from the Single Source Precursor Ti(BH4)3(1,2-dimethoxyethane)[J].Chemistry of Materials: A Publication of the American Chemistry Society,2007(15):3802-3807. |
[7] | Yeon Hwang;Jong Kook Lee .Preparation of TiB_2 powders by mechanical alloying[J].Materials Letters,2002(1):1-7. |
[8] | 汤文明 等.机械合金法制备TiB2纳米晶粉末[J].中国有色金属学报,2006,16(03):613. |
[9] | 张智敏,蒋明学,李勇,邹明.碳热还原法制备硼化钛热力学分析[J].轻金属,2008(11):46-49. |
[10] | 马爱琼,蒋明学,王臻.碳热还原法合成硼化钛[J].硅酸盐学报,2010(10):1867-1871. |
[11] | 马爱琼,蒋明学.TiB2合成反应机理的优势区相图分析[J].中国有色金属学报,2011(06):1409-1414. |
[12] | 陈燕群,蒋明学.自蔓延高温合成TiB2微粉的热力学计算[J].西安建筑科技大学学报(自然科学版),2006(05):728-730. |
[13] | 张廷安,杨欢,牛丽萍,张国悦,徐淑香,赫冀成.镁热还原自蔓延高温合成硼化钛微粉的动力学①[J].中国有色金属学报,2001(04):567-570. |
[14] | 张廷安,豆志河.自蔓延冶金法制备TiB2微粉的生长机理研究[J].无机材料学报,2006(03):583-590. |
[15] | Haijun Zhang;Faliang Li .Preparation and microstructure evolution of diboride ultrafine powder by sol-gel and microwave carbothermal reduction method[J].Journal of Sol-Gel Science and Technology,2008(2):205-211. |
[16] | E. Baca;N. Stelzer .Adapting of sol-gel process for preparation of TiB_2 powder from low-cost precursors[J].Journal of the European Ceramic Society,2008(5):907-911. |
[17] | A. Rabiezadeh;A.M. Hadian;A. Ataie .Preparation of alumina/titanium diboride nano-composite powder by milling assisted sol-gel method[J].International Journal of Refractory Metals & Hard Materials,2012(Mar.):121-124. |
[18] | 赵昆渝,严丙勇,李智东,李莉,朱心昆,段云彪,刘国玺,马秋花,葛伟萍.机械合金化制备TiB2粉末的机理研究[J].机械工程材料,2004(03):25-27. |
[19] | A. Calka;D. Oleszak .Synthesis of TiB_2 by electric discharge assisted mechanical milling[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):346-348. |
[20] | Riccardo Ricceri;Paolo Matteazzi .A fast and low-cost room temperature process for TiB_2 formation by mechanosynthesis[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):341-346. |
[21] | Kiyotaka Matsuura;Yuki Obara;Keisuke Kojima .Combustion synthesis of boride particle dispersed hard metal from elemental powders[J].International Journal of Refractory Metals & Hard Materials,2009(2):376-381. |
[22] | 向军辉;肖汉宁 .TiB2材料的研究现状及其应用[J].陶瓷工程,1997,29(04):40. |
[23] | 孟范成,傅正义,张金咏,王为民,王皓,王玉成,张清杰.自蔓延高温合成/快速加压法制备二硼化钛陶瓷的致密化机理[J].硅酸盐学报,2007(04):430-434. |
[24] | 逄婷婷,傅正义,张东明.TiB2陶瓷的放电等离子烧结[J].硅酸盐学报,2003(06):533-537. |
[25] | Zhang Zhaohui et al.Low-temperature densification of TiB2 ceramic by the spark plasma sintering process with Ti as a sintering aid[J].Scripta Materialia,2012,66:167. |
[26] | Sandia Laboratories et al.Activation energies and populations of hydrogen traps in TiB2[J].IEEE Transactions on Nuclear Science,1979,26:1305. |
[27] | 陈枭,张仁元,李风.TiB2防护涂层的制备及性能[J].涂料工业,2011(07):24-27. |
[28] | 欧阳辰鑫,林文松,吴柯夫.TiB_2靶材及涂层的制备[J].热加工工艺,2009(24):72-73. |
[29] | 罗成,董仕节,熊翔,罗平.Cr12MoV钢表面电火花沉积TiB2涂层特性研究[J].模具工业,2009(03):63-67. |
[30] | 任必军,石忠宁,班允刚,王兆文.300 kA大型电解槽阴极新材料的应用[J].材料与冶金学报,2006(04):263-267. |
[31] | Li Jun et al.Preparation of the TiB2 coatings by electroplating in molten salts[J].Materials Letters,2007,61:1274. |
[32] | C.L.Yeh;Y.L.Chen .Combustion synthesis of TiC-TiB2 composites[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):373-377. |
[33] | Li Junshou et al.Characteristics of porous Al2O3-TiB2 ceramics fabricated by the combustion synthesis[J].Journal of Alloys and Compounds,2009,479:803. |
[34] | Liu Jingjing et al.An experimental study on synthesizing TiC-TiB2-Ni composite coating using electro-thermal explosion ultra-high speed spraying method[J].Materials Letters,2010,64:684. |
[35] | B. A. Cook;J. S. Peters;J. L. Harringa;A. M. Russell .Enhanced wear resistance in AlMgB_(14)-TiB_2 composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2011(5/6):640-646. |
[36] | T.S.R.Ch. Murthy;C. Subramanian;R.K. Fotedar .Preparation and property evaluation of TiB_2 + TiSi_2 composite[J].International Journal of Refractory Metals & Hard Materials,2009(3):629-636. |
[37] | Dong, L.;Sun, Y.D.;Li, D.J. .Optimal deposition and layer modulation parameters for mechanical property enhancement of TiB2/Si3N4 multilayers using orthogonal experiment[J].Surface & Coatings Technology,2010(S1):S422-S425. |
[38] | George Volonakis;Leonidas Tsetseris;Stergios Logothetidis .Electronic and structural properties of TiB_2: Bulk, surface, and nanoscale effects[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2011(6):484-489. |
[39] | Atiye Nekahi;Sadegh Firoozi .Effect of KG, NaCl and CaCl_2 mixture on volume combustion synthesis of TiB_2 nanoparticles[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2011(9):1377-1383. |
[40] | Longstrethspoor et al.Nanostructure of room temperature deposited TiB2 on Si(001)by pulsed laser ablation[J].Thin Solid Films,2008,516:5981. |
[41] | Fei Huang;Zhengyi Fu;Aihua Yan .Experimental evidence of structural evolution for TiB2 microcrystal under externally high stresses[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2010(1/2):83-86. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%