通过DEFORM-3D软件模拟了不同的挤压速度与初始坯料温度条件下,模芯的角度(90°,120°,150°)对管材静液挤压成形过程的影响.模拟结果显示,静液挤压过程中大角度模芯的压力峰值明显高于小角度模芯的压力峰值,同时随着模芯角度的增大管材的速度场分布不均性增加.
The hydrostatic extrusion process of magnesium alloy AZ80 tube with different mandrel angles (90°,120°,150°) was simulated by the DEFORM-3D software with different extrusion speeds and initial billet temperatures.The simulated results show that the peak load of the extrusion process with big mandrel angle is obviously higher than that of the small angle and the inhomogeneity of billet velocity field is intensified with the increase of the mandrel angle.
参考文献
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%