研究了两种铜含量超低碳钢的连续冷却过程中铜的析出规律.试验在Gleeble 1500热模拟机上进行.通过对试样进行硬度测试及组织观察,总结分析了不同冷却速度对试样的硬度、金相组织及析出物的影响.结果表明:含铜2.04%(质量分数,余同)的超低碳钢以1℃/s冷速冷却时,硬度出现峰值,呈现很强的沉淀强化效果;含铜1.04%的钢在以不同的冷速连续冷却过程中,硬度值变化不大.
参考文献
[1] | 李智;王国栋;刘相华 等.SBL非调质钢奥氏体的连续冷却转变[J].金属热处理学报,1999,20(03):42. |
[2] | D. T. Llewellyn .Copper in steels[J].Ironmaking & Steelmaking: Products and applications,1995(1):25-34. |
[3] | Thompson S W;Krauss G .Copper Precipitation During Continuous Cooling and Isothermal Aging of A710-Type Steels[J].Metallurgical and Materials Transactions,1996,27A:1587. |
[4] | Yasuhiro Kamada;Seiki Takahashi;Hiroaki Kikuchi;Satoru Kobayashi;Katsuyuki Ara;Junichi Echigoya;Yusuke Tozawa;Kenta Watanabe .Effect of pre-deformation on the precipitation process and magnetic properties of Fe_Cu model alloys[J].Journal of Materials Science,2009(4):949-953. |
[5] | 雍岐龙;马鸣国.微合金钢-物理和力学冶金[M].北京:机械工业出版社,1989 |
[6] | Naoki Maruyama;Masaaki Sugiyama;Takuya Hara;Hiroshi Tamehiro .Precipitation and phase transformation of copper particles in low alloy ferritic and martensitic steels[J].Materials transactions,1999(4):268-277. |
[7] | Dhua S K;Muker J D;Sarma D S .Influence of Tempering on the Microstrueture and Mechanical Properties of HSLA-100 Steel Plates[J].Metallurgical and Materials Transactions,2001,32A:2259. |
[8] | Ghosh A;Mishra B;Das S et al.Microstructure,Properties,and Age Hardening Behavior of a Thermomechanically Processed Ultralow-Carbon Cu-Bearing High-Strength Steel[J].Metallurgical and Materials Transactions,2005,36A:703. |
[9] | 郭凤莲 .含铜高纯钢中铜的沉淀规律的研究[D].内蒙古科技大学,2007. |
[10] | Goodman S R;Brenner S S .An FIM-Atom Probe Study of the Precipitation of Copper From Iron 1.4 at Pet Copper[J].Metallurgical and Materials Transactions,1973,4(10):2363. |
[11] | 王海燕,安治国,任慧平,刘宗昌,王玉峰.含铜高纯净钢时效过程中铜偏聚区的演变[J].材料热处理学报,2007(06):67-70. |
[12] | 李闯,王学敏,尚成嘉,郑长安,贺信莱.Fe-2.0Cu合金连续冷却过程中Cu的析出行为[J].金属热处理,2009(06):33-37. |
[13] | 李树棠.金属X-射线衍射与电子显微分析技术[M].北京:冶金工业出版社,1982 |
[14] | 宋维锡.金属学[M].北京:冶金工业出版社,1989 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%