欢迎登录材料期刊网

材料期刊网

高级检索

采用金相显微镜和扫描电镜研究Cu-9Ni-2.3Sn(C72500)合金经剪切变形后合金切面的微观组织以及随后在550 ℃退火2 h后切面的组织变化.结果表明:经剪切变形后,切面处形成一种独特的带状变形孪晶和蜂窝状变形组织,且存在挤压、扭折等多种变形机制的作用;合金在550 ℃退火2 h后,切面出现许多再结晶晶粒,且在承受剪床切口的一边再结晶晶粒非常细小,相当于冷轧变形80%后的再结晶晶粒尺寸.根据这种现象,以异步轧制和板材连续剪切变形技术(C2S2)为基础,提出一种金属板材利用剪切变形配以适当热处理来细化晶粒的构想,有望在材料加工领域实现新的突破.

参考文献

[1] LU K;LU J .Surface nanocrystallization (SNC) of metallic materials-Presentation of the concept behind a new approach[J].Journal of Materials Science and Technology,1999,15(02):193-197.
[2] Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189.
[3] 张洪旺,刘刚,黑祖昆,吕坚,卢柯.表面机械研磨诱导AISI 304不锈钢表层纳米化Ⅱ.晶粒细化机理[J].金属学报,2003(04):347-350.
[4] LU K;LU J .Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science and Engineering A,2004,375-377:38-42.
[5] Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189.
[6] 胡兰青,李茂林,王科,刘刚,卫英慧,许并社.铝合金表面纳米化处理及显微结构特征[J].中国有色金属学报,2004(12):2016-2020.
[7] 孙文儒,郭守仁,佟百运,卢德忠,胡壮麒.变形IN718合金冲击断口表面纳米化现象及机制[J].材料研究学报,2003(02):122-126.
[8] Dobromyslov, A.V., -;Kazantseva, NV;Kozlov, EA;Taluts, NI .Formation of adiabatic shear bands and instability of plastic flow in Zr and Zr-Nb alloys in spherical stress waves[J].Scripta materialia,1999(1):61-71.
[9] Ravichandar K. .ON THE FAILURE MODE TRANSITIONS IN POLYCARBONATE UNDER DYNAMIC MIXED-MODE LOADING[J].International Journal of Solids and Structures,1995(6/7):925-938.
[10] MUKAI T;KAW AZOE M;H IGASH I K .Dynamic mechanical properties of a near nano aluminum alloy processed by equal channel angular extrusion[J].Nano-Structured Materials,1998,10(05):755-765.
[11] Chang JY.;Shan A. .Microstructure and mechanical properties of AlMgSi alloys after equal channel angular pressing at room temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):165-170.
[12] DONG H S;INYOUNG K .Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing[J].Materials Science and Engineering A,2003,347:239-224.
[13] SEMIAT IN S L;DELO D P .Equal channel angular extrusion of difficult-to-work alloys[J].Materials & Design,2000,21(04):311-322.
[14] J.-C. Lee;H.-K. Seok;J.-Y. Suh .Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing[J].Acta materialia,2002(16):4005-4019.
[15] Jae-Chul Lee;Hyun-Kwang Seok;Jun-Hyun Han .Controlling the textures of the metal strips via the continuous confined strip shearing (C2S2) process[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2001(5/6):997-1004.
[16] 胡衍生,程晓茹,李虎兴,宋耀华.中厚板轧制头部弯曲机理的探讨[J].钢铁,2003(06):28-31.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%